KINKAI Heat Pump Fruit Dryer Introduction
KINKAI Heat pump fruit dryer is use of reverse Carnot principle .With free air to absorb heat and transfer it to the drying chamber, drying room temperature to achieve improved, with the appropriate humidity and dehumidification equipment to achieve dry materials. heat pump dryer Compressor - heat exchangers - Chokes - heat sink (outside the machine) - Compressor and other devices constitute a refrigerant cycle system.
KINKAI heat pump fruit dryer operates according to a basic reverse Carnot cycle. The working fluid(refrigerant) at low pressure is vaporized in the evaporator, by heat drawn from the dryer exhaust air. The compressor raises the enthalpy of the working fluid of the heat pump and discharges it as superheated vapor at high- pressure. Heat is removed from working fluid and returned to the process air at the condenser. The working fluid is then throttled to the low-pressure line(using an expansion valve) and enters the evaporator to complete the cycle. In the dryer system, hot and dry air at the exit of condenser is allowed to pass through the drying chamber where it gains latent heat from the material. The humid air at dryer exit then passes through the evaporator where condensation of moisture occurs as the air goes below dew point temperature. Then drain the condenser water.
|Double Dryers + Drying Chamber|
|Model||Unit||JK03RD (x2)||JK06RD (x2)||JK12RD (x2)|
|Power Supply||V/PH/HZ||380V/3PH, 50/60HZ||380V/3PH, 50/60HZ|
|Rated Current||A||19.2A(380V), 44A(220V)||34||60|
|Electric Shock Protection Grade||I||I||I|
|Max. Exhause Pressure||Mpa||3||3||3|
|Power Consumption/ H||KWH||9.6||17||30|
|Blowing Type||/||Horizontal Blowing 360ºC|
|Dimension Of Dryer||MM||1675x860x1280||1760x1060x1280||2120x1360x1590|
Features of KINKAI Fruit Dryer
1, Energy saving and environment protection
Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise
2, Stable property and operating easily
Touch screen full automatic control
Different materials with different drying type, adopt PLC control, can setting different drying curve, suitable for drying different materials.
3, Second waste heat recovery technology(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.
4, Accurate control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10~75C.
5, Horizontal Blowing 360ºC
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so ensure a high drying efficiency and save energy, lead to a uniform drying.
6, It's batch operation, so can adjust process condition anytime. Thus can change product from time to time
7, Dry material in tray, easy for load and unload, not easy cause any damage for the raw material, clean conveniently.
Recommend Dryer+Drying Chamber Sizes
Warm prompt: We can make any drying chamber sizes as your required.
|Item||Description||Product Capacity||Drying Chamber size|
|1||One unit JK03RD dryer + drying chamber||300Kg / batch||4000*2000*2200mm|
|2||One unit JK06RD dryer + drying chamber||600Kg / batch||6000*2800*2200mm|
|3||One unit JK12RD dryer + drying chamber||1000Kg / batch||6000*3000*2200mm|
|4||Two units JK03RD dryers + drying chamber||1200Kg / batch||7000*2200*2200mm|
|5||Two units JK06RD dryers + drying chamber||1500Kg / batch||10000*2800*2200mm|
|6||Two units JK12RD dryers + drying chamber||2500Kg / batch||10000*3000*2200mm|
Delivery and Package
For heat pump dryer parts---with plywood
For drying chamber +trolleys
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL( less than container load), packed in plywood
A. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.
Add: Huadu District, Guangzhou City, Guangdong Province, P.R. China