Part I: Introduction of floor scrubber
Industrial floor scrubber machines are available in different application solutions, different sizes, different power mechanisms and different configurations. These machines are designed and built to clean warehouses, industries, machine shops, or any application where extra cleaning performance is desired and durability is demanded. Our floor scrubber come standard with a class leading battery package for superior run time.
Part II: How to use the floor scrubber?
1. The function buttons are complete, the touch control is flexible, the operation is simple and convenient, and the working time of the LCD panel screen display motor is controlled.
2. Brush plate sucking up adopt automatic lifting function, sucking up automatically when reversing, effectively protecting water sucking up.
3. The absorption motor adopts that shutdown function with a delay of 5 seconds to prevent the back flow of sewage.
4. Intelligent water quantity sensing system. When the sewage tank is full or the clear water tank is empty, the motor stops working automatically, effectively prolonging the service life of the motor and improving the working efficiency.
5. 35% of working efficiency will be easily improved by super large water tanks of 160L solution tank and 180L recovery tank.
Part III: Applicable floor materials
The floor scrubber applies to municipal building site,square,super market ,factories ,workshop and a variety of public places.
And can clen Terrazzo floor, PVC hard floor, Vitrified brick floor, Epoxy floor, Emery wear-resistant floor and concrete/cement floor etc..
Part IV: Datas of 160S floor Scrubber
| Electronic control: British PG controller |
Cleaning Width: 900mm |
Suction Motor: 600w |
Clean Water Tank: 160L |
| Battery: 24V200AH |
Cleaning Width: 1150mm |
Sewage tank: 180L |
Work Efficiency: 6000m²/h |
| Suction Motor: US brand, AMETEK |
Brush Motor: 500w*2 |
Propelling Motor: 650w |
Size: 1650*940*1450mm |
Part V: Package and Delivery
Each machine is put on a polywood pallet, then carton;
Wooden box or air bubble film and carton for plastic products or as your request.
Normally, for testing sample, we can arrange the delivery within 7 days;
Part VI: FAQ
Q:Why can't the floor scrubber water absorption motor start?
1. Check whether the water volume of sewage tank is full.
2. Check whether the water level sensor in the sewage tank is blocked by foreign matters or fails.
Q:Why is sewage left on the ground?
1. Check whether the water absorption rubber strip is worn.
2. Check whether there is any foreign matter between the two suction strips.
3. Check the suction pipe for foreign material.
4. Check whether the suction filter is damaged or not clean.
5. Check whether the sealing ring of the sewage tank cover is in good condition.
6. Check whether the suction pipe is correctly connected to the suction grill.
Q:Why is the ground stained?
A:Check whether the brush / cleaning pad is used to clean the floor and stains.
Q: Why are water stains left on the ground?
A: 1. Whether the cleaned ground belongs to soft ground.
2. Check whether there is any foreign matter between the two suction strips.
3. Check whether the water absorption rubber strip is worn.
4. Check whether the suction grill is adjusted correctly.
Audited Supplier 
){kind=link}
){kind=link}