Certification: | ISO, SGS |
---|---|
Condition: | New |
Working Mode: | Intermittent |
Installation: | Horizontal |
Usage: | Construction Machinery, Crane Parts |
Power Source: | AC 380V, 3 Phase, 50 Hz |
Customization: |
---|
Suppliers with verified business licenses
ED Series electro hydraulic thruster is a compact drive control device integrating motor, centrifugal pump and oil cylinder. It is widely used as a drive device for various block brakes and disc brakes, as well as for various industrial valves and gates. , Directional swing and rotation (<90°) device and drive control of clamping device
Conditions of use
1.Ambient temperature: -20ºC~50ºC use DB-25 hydraulic oil, below -20ºC use YH-10 aviation hydraulic oil, no heater; With DB-25 hydraulic fluid, must
A heater must be installed.
2.Continuous work S1, intermittent work S3-60%.
3.Voltage and frequency: three-phase AC 380V/50(60)Hz, our company can also provide other different frequency, different voltage products, please negotiate to order when necessary.
4.Three-phase AC asynchronous motor, in accordance with the regulations (GB755-2000), the performance is detailed in "Technical data".
Insulation class: F, electrical protection class: IP65.
5. Cable: The maximum cross section of the wire is 4X2.5mm2.
6. Efficient anti-corrosion products: for corrosive media in the air and high relative humidity, and may generate condensate. The stator of the motor is made of vacuum injection molding and painted
With special anti-corrosion paint, series of products can provide anti-corrosion products, users need to contact the company
Features
1.The piston rod adopts advanced protective measures to reduce wear and anti-corrosion, with double-layer dust seal and hydraulic system
The oil chamber seal adopts double sealing ring, which greatly improves the service life.
2. Connecting rod can be rotated 360°.
3. Additional devices are shown in the attached table.
FAQ
Suppliers with verified business licenses