Dongguan, Guangdong, China
Member Since: 2018
Business Type: Manufacturer/Factory
Name of goods
High temperature sintering at 1000 C (YTH-36)
1. machine sizeW1590mm*H1400mm*L6540mm (about) ; Entry area:W1295mm*H910mm*L610mm (about)
Heating zone:L350mm ; Heating area:330mm*10 area =3300mm
Temperature zone:350mm : Retreat area:1495mm ; Out area:W1295mm*H910mm*L610mm
The range of MAX1000 C: 800~900 C (high temperature zone) temperature uniformity: 90% of the conveyed steel strip wide, and the high temperature constant temperature zone in the left of the temperate zone, and the longitudinal surface of the right steel strip can be maintained at + 3.
2. electricity:AC220V 3 60HZ 116KW
3. heating system:Ceramic heating plate up and down
Upper heating plate -10
Lower heating plate -10
4. transport systemConveyer belt material: NI80
Transport mesh specification: W900mm *L15000mm
5. transport speed:100~250mm/min (standard speed: 180mm/min)
Drive motor: AC 3P motor
The frequency converter drives and controls the motor speed. The speed setting is set through RS485 module conversion DC0~10V to provide frequency converter control (Inverter) control.
6. but system
The copper row is attached to the upper chamber, and the lower part is absorbed by the copper bar to dissipate heat, so as to achieve the efficient way of cooling.
The use of the pattern
Entrance air brake (Enterycurtain): 15~100L/min*1
Burning pressure (Firing): 40~300L/min*1
Entrance disturbing (Cooling): 15~100L/min*1
Exit air brake (Purge/Exit): 100L/min*1
8. control system
Control mode: double set type (one set for temperature control meter controller, one for computer display).
10 district heating area temperature control, each district is divided into left, middle, right temperature watch alone control area 30 temperature control table.
Temperature control mode: P I D (ratio / integral / differential)
Control interface: WINDOWS
Electrothermal control: SCR
Electric thermocouple: K Type
Heating limit: when heating is heating, it limits the temperature rise per minute, 3~5 C /min
Maximum heating value: limit heating output power
Bar chart: a simple bar chart shows the state of temperature and temperature. Red indicates normal, and color indicates normal.
SET settings: set the temperature, speed, alarm and correction values.
PID adjust the picture: the PID settings in each temperature zone and the operation of PID heating and display must be coded.
Temperature uniformity test: the high temperature temperature measurement line is actually entered into the dam, and the chart is made with temperature and time and temperature zone to analyze the temperature uniformity of each temperature zone.
1. warm up and down warnings
2. air pressure upper and lower alarm
3. transmission speed upper and lower alarm
∗ Reasonable design
∗ Low consumption, energy saving
∗ Easy to maintain
∗ Easy to operate
Shipping and packing
(1) By sea (2) By air (3) By expressage.(DHL,FEDEX,UPS,TNT etc.)
Custom packaging:We also packing according to customers' requirement.We can make the prouducts according to your requirement , no matter what country you are from.