Description: High thickness aluminum sheet 7075
TypeFeaturesApplications
6061T6Excellent joining characteristics, good acceptance
Of applied coatings, relatively high strength, good
Workability, and high resistance to corrosionAircraft fittings, camera lens mounts, couplings,
Marines fittings and hardware, electrical fittings
And connectors, decorative or misc. Hardware,
Hinge pins, magneto parts, brake pistons, hydraulic
Pistons, appliance fittings, valves and valve parts.
3003H14Good weldability/formability and very good corrosion
ResistanceFood and chemical handling, tanks, trim, litho sheet,
Pressure vessels, and piping.
5052H32Good workability, very good corrosion resistance, high
Fatigue strength, weldability, and moderate strengthAircraft fuel/oil lines, fuel tanks, other transportation
Areas, sheet metal work, appliances and lighting, wire,
And rivets.
2024T3Good weldability/formability and very good corrosion
ResistanceStructural areas such as aircraft structures, fasteners,
Hardware, wheels, screw machine products.
7075T6High tensile strengthUsed for highly stressed structural parts
1100 O and
1100H14Intrinsic formability and corrosion resistanceChemical and food handling, sheet metal, hollowware,
Heat exchangers, and lighting.
2024T3Intrinsic formability and corrosion resistanceAircraft structures, fasteners, hardware, wheels, screw
Machine products
3003H1Weldability/formability and very good corrosion
Resistance Food and chemical handling, tanks, trim litho sheet,
Pressure vessels, and piping.
5052H32Good workability, very good corrosion resistance, high
Fatigue strength, weldability, and moderate strengthAircraft fuel/oil lines, fuel tanks, other transportation
Areas, sheet metal work, appliances and lighting, wire,
And rivets
6061T651Excellent joining characteristics, good acceptance of applied coatings,
Relatively high strength, good workability, and high resistance to corrosion
| Chemical Composition |
Aluminum
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others |
Al |
| Single |
Total |
| 7075 |
0.40 |
0.50 |
1.2~2.0 |
0.30 |
2.1~2.9 |
0.18~0.28 |
5.1~6.1 |
0.20 |
0.05 |
0.15 |
The Rest |
| |
| Temper: H112, T6, T651 |
| Features |
1. Excellent Heat-Treatment Effect;
With High Strength Below 150 Celsius and Wonderful Low Temperature Strength ;
2. Not Easy to weld and cold process with good mouldability;
|
| Application |
Wide application especially in Plane, Aviation Industry;
Plane Boat Parts etc. |
Audited Supplier 
){kind=link}
){kind=link}