Full Automatic Flexo Printing slotting Die-cutting Machine
Main Technology parameters:
| Model |
YJ200-1426 |
| Machine inside width (mm) |
2800 |
| Max feeding paper siz(mm) |
1400*2600 |
| Max effective printing size(mm) |
1400*2400 |
| Min coverage size(mm) |
400*600 |
| Design speed (PCS/min) |
200 |
| Working speed (PCS/min) |
160-180 |
| Standard Thickness of printing plate |
6mm |
| Printing precision |
±0.5mm |
| Thickness of cardboard |
1.2-9mm |
| Wall thickness |
50mm |
| Main motor power |
About 18kw |
Performance and Characteristics:
1.The machine can finish multi processes one time such as: printing, slotting, creasing, trimming, corner cutting, punching, die cutting, stacking and so on.
2.Machine is designed according to high request and reliable function, humanization operation, it can setting, revision, implement, changing and memories in short time, and display data accurately .
3.All of drive rollers are made of high quality steel with temper and quenching treatment, not change shape when high speed running, hard chrome plated the surface with grinded.
4.Drive gears adopt high quality steel with heat treatment with grinded, adopt cross slip system connect each gear, keep gear fix position, ensure transmission precision.
5.The main drive roller adopt keyless connect, decrease the connection gap, ensure printing precision.
6.The machine adopts sealed spray lubrication for gear system, engineer oil automatic balance device; keep the oil level equal in each unit.
7.Motorized digital phase adjustment with "automatic zero return" and "memories" function ( options: PLC control with touch screen)
8.Lead edge feeder with vacuum sucntion, easy operate, high precision.
9.All units move automatic orderly, locked by pneumatic, alarm continually
10.Main motor is VFD, working stability, low power consumption.
Feeding unit
1.Light pressure type Lead edge feeder with vacuum suction, wind is adjustable depend on sheet, make sure feed sheet more smoothly.
2.Main motor with start protecting device, machine cannot run when machine units aren't lock.
3.Continuous or skip feeding available
4.Double feed rollers wrapped with rubber, with groove prevent overpressure, reduce pressed sheet
5.Left-right baffle adjusted by computer with automatic flap, back baffle adjusted by motorized, front baffle electrical synchronous adjust.
6.Dust clearance bush and fan to clean dust on board. Air outlet can be adjusted as per sheet size
7.Machine units move by motorized and move with alarm belling to make sure safety.
printing unit
- Fast change printing plate, with footstep to control cylinder rotate clockwise or anticlockwise
- Feed roller, press roller, rubber roller, anilox roller gap adjust with self-lock part
- Printing phase adjusted by PLC in 360degree with digital input, do when machine running or stop
- Pneumatic brake device to keep printing register fixed, when units separate or clean, brake limit gear rotate, keep original gear position.
- Pneumatic lift anilox roller for ink, motorized ink will no dry.
- Printing cylinder made of seamless steel pipe, be grinded with chrome plated, do balance treatment, running smooth and steady.
- Lift-down design( when feed sheets anilox roller down in order, stop sheet lift rollers in order)
- Double diagram pump ink, recycle automatically, clean with water
- Memory function, after clean plate it back to original position
- Printing precision: +-0.5mm
- Printing cylinder horizontal move by motorized
- Steel anilox roller from Haili brand (option: ceramic roller with doctor blade)
slotting unit
- Box height adjusted by motorized.
- Slotting phase adjusted by PLC in 360 degree with digital input, do when machine running or stop.
- Slotting die and crease die move together by motorized
- Crease gap and knife gap adjusted by self-lock mechanism
- Collison protection on slotting knife for height adjust and move, don't damage machine
- Collison protection for slotting die horizontal move (electronical)
- Slotting knife width 7mm, good quality material, with hot-treatment and grinded, teeth knife, double-piece trim knife, sharpen and precision.
rotary die-cutter
- Rubber roller: made of good quality steel, be grinded with chrome plated.
- Do balance treatment, improve machine running steady
- Rubber cylinder is separate with die cylinder by air cylinder when no cutting, reduce no-load and prolong blanket use-life.
- Die roller lift-down automatic by pneumatic control( feed sheets roller go up, stop feeding roller down, make sure correct cutting for every sheets)
- Rubber roller move 40mm in left and right, wearable average prolong use-life
- Rubber roller rotates follow die roller by speed compensation device whatever how rubber diameter change, make sure rubber speed same as wooden die, keep cut box is consist with wooden die.
- Planetary gear structure used for phase adjustment.
- Phase adjustment by PLC in 360degree with digital input( can be done when run, stop or clockwise or anticlockwise)
- Machine have repair roller to grind blanket, so it can use many times.
Vibrator & stacker
- Gantry stacker lift-down by motorized
- Full piece belt to convey, smooth and tidy.
- Electric stack and collect sheet, up to store height.
- Photoelectric measure stack height.
After-sale:
FAQ:
1. Q: Are you a manufacturer, trading company or a third party?
A: We are a manufacturer, located in Mahai industrial area south of Dongguang county, Hebei province, China. Warmly welcome to visit our company.
2. Q: How does your factory do regarding quality controlling?
A: 1) All raw material we used are environmental-friendly
2) Skillful workers care every details in handling the producing and packing process
3) Quality control department are specially responsible for quality in each process
We have been kept providing high quality products by introducing advanced technologies for over 20 years, and our products are also widely exported to many different countries including Russia, the Middle East, Africa, Southeast Asia, EU, etc, which earned us a high reputation among the customers.
3. Q: What is the payment terms?
A: T/T, it is 30% deposit due at placing order and 70% balance due before loading.
4. Q: How about the after-sale service?
A: 1) TM online for 24 hours, also contact by email, skype, MSN, whatsapp, etc.
2) To solve the problems with videos/pictures.
3) One year warranty for spare parts change.
Audited Supplier 
){kind=link}
){kind=link}