Qingdao, Shandong, China
Business Type: Manufacturer/Factory
Model No. | PCR-001 |
Structure | Packing down, easy to transport Ground type, staff could go inside for painting |
External Size(mm) | 2580(L)*3355(W)*3040(H) |
Internal Size(mm) | 2500(L)*2500(W)*2200(H) |
Cabin System | Made by galvanized steel, powder coated on the surface. |
Powder Recovery System | Dust filter cartridges*6 sets, each size 600mm*Ø320mm |
Solenoid valves*6 sets, the holeØ20mm,DC24V | |
Circulation System | 1 set of centrifugal blower, 7.5kw motor, air flow6000-9000m³/h The blower connected with booth by anti-flaming soft tubes The exhaust vent of the blower could be adjusted in four directions |
Blower Holder System | Made by 80*80 square tubes Independent from the booth to prevent the resonance and reduce the noise |
Lighting System | 6 sets of explosion proof lights,2 LED lights,14W for each , total 12 |
Control System | 1 set, control the fan and powder recovery system Chinese and English display panel, All of fan, recovery system, lighting system can control independently |
Material | Made of galvanized steel, high smoothness, prevent to get rust, and high spray adhesion. |
Surface treatment | Electrostatic powder coated surface, smooth and easy to clean. |
Bases structure | Assembled structure, easy to transport |
Roof shape | Arc structure on the top, easy to clean. |
Work station | 2 spray work stations |
Recovery system | 2 set of automatic pulse blow-back single-stage recovery system |
Fixed Fan | Fan is supported on the holder |
Shock absorption of Fan | shock absorption cushion |
Shockproof | The blower connected with booth by anti-flaming soft tubes. |
Winding direction | Blower's outlet can be adjustable in four direction (90 degrees) |
Control cabinet | Chinese and English display panel, all the fan, recovery system, lighting system can control independently |
Control method | Digital pulse control, by setting parameters of off memory, you can control pulse width, pulse interval, quantity of pulse unit and checking if the function of pulse blowback is working properly |
Except 2 working opening, there are also 1 exit and 1 entrance opening on opposite sides. There is a rail throughout the booth, thus the workpieces can drift in-and-out the booth through the rail. Its apply to the coating of large panel workpieces. |
The booth is made of galvanized steel, powder coated on the surface. That made it beautiful, long servicing life and easy cleaning. |
Packing down, easy to transport. |
Isolated LED proof light, achieving rated brightness in 0.5s after electrify. |
4 units pulse blowback single-stage recovery system, cleaning the blocking powder on the filter automatically. |
Independent blower holder, connected with the booth by a soft anti-flaming tube to prevent the resonance and reduce the noise. |
The independent carriage of Fan can adjust the direction of air exhaust( 90 degrees spacing rotation ), convenient to connected to the outside with PVC tube. |
There is a interface that transformed square to round on the outlet of the fan, thus the standard circular PVC tube can be used as the exhaust duct, allowing for easy installation |
Back to the recovery system, it set up 2 doors with sealed strip. People shouldn't enter the booth when changing filters. |
Door lock of the recovery system has the function of automatic tension, it can able to compact sealed strips, in case of powder leakage. |
Bilingual board, digital pulse control programmer, pulse control the microcomputer core, digital display, set and use easily and stable operation. |