SMC Composite Manhole Cover BS EN124 Applications
Underground Electrical Installations
Access to Pipe work Chambers and Petroleum Storage Tanks
SMC Composite Manhole Cover Description:
Designed to meet and exceed D400 loading rating, according to BS En124: 1994.
Special designed anti-slip surface pattern ensure the road safety.
Equipped with screw and lock, make the manhole cover and road safer.
Sealing rubber between cover and seat reduces noise and lower vibration transmissions, which extend the service life.
Light weighted compared with the same model of cast iron manhole cover.
What is SMC Composite Material ?
SMC is the short form of sheet mould compound. This is a raw material for mold pressing. The core is chopped strand and unsaturated polyester resins paste that are covered by LDPE & HDPE sheet. It is 3mm-6mm thickness,600mm-1200mm wide and packing in rolls or boxes. When using , be sure to cut , weigh , uncover film, and join in the heat up mould, after adding high pressure and preserve a period, then you can take off membrane to get the product.
SMC Composite Manhole Covers Characteristic:
1. High load rating and strength
Similar hard property as cast iron, while have a overwhelming advantage on stretch recovery.
Designed to meet and exceed A15/B125/C250/D400/E600 loading rating, according to En124: 1994.
Less noise and lower vibration transmissions.
2. Against theft and safety options
Zero theft value, reducing potential accident and further maintenance cost caused by thieves.
Surface anti-slip thread guarantees safe road condition even in extreme weather.
Locks are available as an option molded into the cover to improve security rate.
Non-electricity conduction and non-heat conduction.
Compared with cast iron manhole covers, composited covers are 50% lighter.
Lightweight allows more loading per vehicle, more convenient transportation and economical saving.
Allows a safer working condition, which a SINGLE worker is enough when installation without risk of injury.
4. Durable service life.
More than 30 years service life without crack and color fading, comparing to 5 years of cast iron.
Anti corrosion water, dust and pets tight, well sealed prevent poisonous gas leaking out.
Without displacement, freely radio signal passing.
Higher and lower temperature tolerance with the range -40°C-200°C.
Wear indicators available when thread depth is in a danger value.
5. Free design
Composite material itself allows for innovative design features, client logo is available as an option.
Much more clear resolution ratio of surface design than cast iron or BMC.
SMC Round Manholes Cover BS EN124 1994 A15, A50, B125, C250 D400
SMC Watertight Manhole Cover Clear Open Dia 300mm D400
SMC Watertight Manhole Cover Clear Open Dia 600mm C250 with Lock
SMC Watertight Manhole Cover Clear Open Dia 800mm A50,B125,C250, D400SMC Watertight Manhole Cover Clear Open Dia 900mm C250 D400
SMC Watertight Manhole Cover Clear Open Dia 900mm C250
SMC Watertight Manhole Cover Clear Open Dia 1000mm X 1000mm A15