Wuhan, Hubei, China
Member Since: 2019
Business Type: Manufacturer/Factory & Trading Company
Interface: HDMI A Male to HDMI A Male
HDMI 2.0 standard. Backward compatible with all previous HDMI
4K x 2K Support - Supports ANY resolution to 4K (4096x2160 and 3840x2160) at 60Hz. (YUV4:4:4 4k@60Hz)
Full 3D Support
TV oversampling refresh rates (such as 120Hz)
4K, as well as 3D, 2K, 1080p, 720p, 480p and more
HDCP 2.2; EDID; CEC
18.0Gbps high speed
32 Uncompressed Audio Channels; 1536kHz Sample Rates
ARC (Audio Return Channel)
Port-powered: No external power needed
Cable Diameter: 0.19 inches (4.8 mm)
Power Consumption: 250mW
Bending Radius: more than 20mm
Operating Temperature: 0-55ºC
Storage Temperature: -20-80ºC
1.If no disparately, please check if the"source" and "display" connectors
are plugged into the correct device, if correctly, please re-install the HDMI driver.
2.If unstable display, please plug the connectors again to make sure the connectors are fully plugged and then check if the fiber cable is seriously bent.
3.If the splash screen or snowflakes happen when using 4K @ 60Hz,please check whether you have have used something like adapter or converter, if yes, please remove the adapter or converter and then plug this fiber cable directly.
4.If there is no image or black screen happens when connecting some Samsung individual display device, please turn off the source device and TV power first and then reset them five minutes later.
1.This fiber cable can not be reversed or dismantled.
2.It can only be connected with the HDMI standard A interface, not MHL interface.
3.Do not pull the cable by force When plugging and unplugging the connector.
4.Please check whether the your device supports HDMI to DVI when turning HDMI signal into DVI signal
5.The cable can not be over-bent in a small range and the bending radius must be more than 20mm.