Print This Page

Home Industrial Equipment & Components Pump & Vacuum Equipment Pressure Pump

High Pressure Fire Fighting Water Electric Pump pictures & photos

High Pressure Fire Fighting Water Electric Pump

After-sales Service:	Worldwide
Warranty:	1 Year
Max.Head:	>150m
Max.Capacity:	>400 L/min
Pressure Medium:	Water
Type:	Handheld

Customization:	Available \| Customized Request

Contact Supplier

Contact Now

Inquiry Basket

Borra Technology Co., Ltd.

Gold Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Manufacturer/Factory

Product Description

Company Info.

Basic Info.

Model NO.

XBD-(I)

Position of Pump Shaft

Vertical Edge

Certification

ISO, SGS

1-Stage Pump

Fire Pump

Pressure Pump

High Pressure Pump

Pump

Booster Pump

Vertical 1-Stage & 1-Priming Pump

Vertical Pump

Electric Pump

Centrifugal Pump

Vertical 1-Stage Pump

Pump

1-Stage & 1-Priming Pump

1-Priming Pump

Fire Fight Pump

Fire Fight Diesel Pump

Transport Package

Wood Case

Specification

ISO

Trademark

Borra

Origin

Wenzhou

HS Code

8413810090

Production Capacity

1000

Product Description

High-Pressure Fire Fighting Water Electric Pump

XBD-(I) vertical single-suction multi-stage fire pump set is a new generation of XBD pipeline medium and low-pressure fire pump set developed by our company based on the original vertical multistage pipeline pump according to the standard requirements of fire pumps. It is used to transport clean water without solid particles and liquids with physical and chemical properties similar to water. It is suitable for fire-fighting water supply on various occasions such as residences, hotels, office buildings, commercial buildings, factories, hospitals, etc.

High Pressure Fire Fighting Water Electric Pump

Characteristics:

1. Compact structure, small, nice, vertical installation, less area for installation needed, gravity on feet, stable running, and long life.
2. Stable running, little noise, highly concentric components.
3. Advanced hydraulic model, high efficiency, and performance.
4. The superior mechanical shaft seal, highly endurable against friction, no leak, long life.
5. The pump inlet and outlet are on the same horizontal line, same sizes, easy to install, and uninstall.
6. Easy to maintain, pipes uninstall is not needed, you only need to take off pump cap nuts, then take out motor and transmission elements, before maintaining.

Application range:

Mainly applied in firefight system pipes pressure boosted water supply, industrial and municipal water supply, and drain, high-building architecture pressure boosted water supply, remote water supply, heating, bathrooms, boiler cold & hot water circulation, pressure boosted air-conditioning system water supply and peripheral facilities.
High Pressure Fire Fighting Water Electric Pump

Technical parameters:

flow: 2 - 162 L/S;
pressure: 0.10-1.25Mpa;
power: 1.1-132KW;
rotation speed: 2900r/min;
diameter: φ25-φ150;
temperature range:≤80ºC.
High Pressure Fire Fighting Water Electric Pump

Model Number	Flow Q (L/s)	Head (m)	Speed n (r/min)	Power P (kW)	Efficiency η (%)	Diameter (mm)
XBD3.6/0.56-(I)25X3	2	36	2900	1.1	30	25
XBD4.8/0.56-(I)25X4	2	48	2900	1.1	30	25
XBD6/0.56-(I)25X5	2	60	2900	1.5	30	25
XBD7.2/0.56-(I)25X6	2	72	2900	1.5	30	25
XBD8.4/0.56-(I)25X7	2	87	2900	2.2	30	25
XBD9.6/0.56-(I)25X8	2	96	2900	2.2	30	25
XBD10.8/0.56-(I)25X9	2	108	2900	2.2	30	25
XBD12/0.56-(I)25X10	2	120	2900	3	30	25
XBD13.2/0.56-(I)25X11	2	132	2900	3	30	25
XBD14.4/0.56-(I)25X12	2	144	2900	3	30	25
XBD3.3/1.11-(I)25X3	4	33	2900	1.1	40	25
XBD4.4/1.11-(I)25X4	4	44	2900	1.5	40	25
XBD6.6/1.11-(I)25X6	4	66	2900	2.2	40	25
XBD7.7/1.11-(I)25X7	4	77	2900	2.2	40	25
XBD8.8/1.11-(I)25X8	4	88	2900	3	40	25
XBD9.9/1.11-(I)25X9	4	99	2900	3	40	25
XBD11/1.11-(I)25X10	4	110	2900	4	40	25
XBD12.1/1.11-(I)25X11	4	121	2900	4	40	25
XBD13.2/1.11-(I)25X12	4	132	2900	4	40	25
XBD14.3/1.11-(I)25X13	4	143	2900	4	40	25

Start, running and stop

Start

1. First of all, pour water into pipes, to make the pump and inlet pipe filled with water. The pipes shall be sealed, no air leaked. (no-water inside start is forbidden)
2. Close globe valve and cock on outlet pipe, to reduce start currency.
3. Rotate the rotor by hand, lubricate the bearing and check the pump impeller, seal the ring, if it cannot rotate, you shall not start.
4. Try to start, motor rotation direction shall be as same as the arrow direction on the pump.
5. When the rotor works normally, open gradually the outlet globe valve, adjust for the work conditions required.

Running

1. Observe the reading in meters, keep it running around the flow and head shown on the nameplate.
2. Regularly check, motor currency value shall not exceed rated currency value.
3. Pump bearing temperature shall not exceed 75ºC, and shall not be 35ºC higher than ambient environment.
4. To start, loosen the stuff cap. Adjust later when started.
5. In case of fragile component abrasion, replace in time.
6. When any abnormal happens, immediately stop and check.

Stop

1. Close the globe valve on the outlet pipe, close the vacuum gauge cock.
2. Stop the motor, and close the pressure cock.
3. In Winter, drain the liquid in the pump completely to avoid frozen cracks.
4. When you will not use it for a long time, uninstall the pump, clean, and lubricate.

High Pressure Fire Fighting Water Electric Pump

Troubleshooting

Fault	Cause	Solution
The pump cannot suck water, pressure gauge & vacuum gauge vibrating	1. Insufficient water pouring 2. Leak between pipe and meter 3. Suction is too high	1, check a leak in the bottom valve. 2, Tighten the leaked part 3, reduce suction
The pump cannot suck, high vacuum is shown in the vacuum gauge	1, bottom valve closed or jammed 2, Too great water suction resistance 3, filter jammed	1, check bottom valve 2, replace water suction pipe 3, clear off the filter
Pressure gauge works, no water outcome	1. Great outlet water pipe resistance 2. Wrong rotation direction 3. Outlet pipe valve closed 4. impeller jammed	1. check or shorten water pipe 2, check the motor, adjust 3, open the valve and clear off the impeller
Cannot reach designed flow	1. air sucked 2. Water level drops, submerged depth is not enough 3. impeller jammed 4. rotor torn and worn	1, check leak part and clear off 2, prolong water inlet pipe, increase the submerged depth 3, uninstall and clear off 4, replace seal ring
Great pump power consumption	1. Stuff tightened, overheated 2. Great flow 3. Collision between rotor and case 4. Pump shaft bearing abrasion 5. Pump shaft misplaced	1. loosen slightly 2. reduce globe valve opening 3. adjust 4. replace bearing 5. replace or adjust
Great pump vibration	1. impeller partially jammed 2. impeller damaged 3. little flow 4. non-concentric between pump shaft and motor. 5, bearing damaged 6, gas etching	1. Uninstall and clear off 2, replace 3, increase opening 4, adjust 5, replace 6, change suction inlet position

Borra Technology Co., Ltd.

Borra Technology co., Ltd., founded in 1995, owns a top-rank design, production, sales, and service team, and modern production lines, to manufacture various self-priming pumps, movable diesel pumps, diesel Self-Priming dirt drain pumps, diesel fire pumps units, diesel mini pumps

Certificate :

High Pressure Fire Fighting Water Electric Pump

Services:

1. One year or 1000 working hours guarantee of the whole machine except for wear parts;
2. Technical support by email the whole day;
3. Calling service;
4. User's manual available;
5. Installation guide for clients from both China and abroad;
6. Maintenance and replacement service;

FAQ:

Q1: Are you a reliable company?
A1: Bora is located in Wenzu, a beautiful city in Zhejiang Province, China. we have many years of manufacturing experience,
we can supply all types of fire protection solutions, Drainage and sewage solution, and other pump products.
We have an independent factory and trade office.

Q2: how to deliver the portable diesel water pump
A2: We can offer our equipment by containers or bulk ship.

Q3: How to pay for the portable Diesel water pump?
A3: We can accept T/T, L/C and soon

Q4: why choose borra company?
A4: We have an independent factory and foreign trade office. so we can design high-quality portable generators
and water pumps according to clients requirements and our price is reasonable.

Contact Us
If you are interested in our products or have any questions about our products, we are very honored to serve you

Send your message to this supplier

*From:

*To:

*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for?  Post a Sourcing Request Now

Find Similar Products By Category

Supplier Homepage Products Centrifugal Pump High Pressure Fire Fighting Water Electric Pump

Hot Searches

Fire Fighting Pump bulkbuy

Product Groups

More Product Catalogs

Contact Supplier

Contact Now

Inquiry Basket

Borra Technology Co., Ltd.

Gold Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Manufacturer/Factory

Management System Certification

ISO 9001, ISO 14001

High Pressure Fire Fighting Water Electric Pump

Contact Supplier

Product Description

Company Info.

Basic Info.

Product Description

Send your message to this supplier

Find Similar Products By Category

Hot Searches

You Might Also Like

Product Groups

Contact Supplier