High Efficiency Rinsing Filling Capping 3 in 1 Drink Pure Water Filling Machine
Water Filling Line:We not only offer stand-alone but also offer full line solution,About the whole line,From Water Treatment system----- Bottle Blowing Machine-----Filling System ----- Packaging System
1,RO Water Treatment Process
Source water tank -----> Source water pump-----> Quartz sand filter-----> Active Carbon filter----->PP sediment filter-----> RO main machine----->Pure water tank----->Filling System
RO Standard Features:
(1) PLC controller in-build, full-automatic working;
(2) High rejection thin film RO membranes;
(3) 304stainless Stainless steel machine frames;
(4) Durable & Efficient 304Stainless Steel Pressure source water Pump and Booster Pump & motors;
(5) Electronic control pan;
(6) Panel Mount Flow Meters (product water & concentrate);
(7) Pressure regulator valves;
(8) Oil-filled pressure gauges for inlet and concentrate;
(9) 304stainless steel Heavy-duty pressure tubing and connector for the RO system.
2,Full Automatic Bottle Blowing Machine
Air Compressor-----> Air Storage----->Air Filter----->Air Dryer----->Air Filter----->Water Chiller----->Preform Feeder-----> Full automatic Blow Molding machine
(1) Stable performance with advanced PLC;
(2) Conveying preforms automatically with conveyor;
(3) Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater;
(4) High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus;
(5) High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure;
(6) Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine;
(7) Strong clamping force with high pressure and double crank links to lock the mold;
(8) Two ways of operating: automatic and manual;
(9) Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand;
(10) Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process;
(11) Contamination is avoided for the bottle body;
(12) Ideal effect of the chilling with the chilling system;
(13) Easy installation and starting;
(14) Low rejection rate: less than 0.2 percent.
3,Filling System (Mainly machine is Tribloc Rinser Filler Capper)
This machine works harmoniously with air-conveyor belt, It holds the bottles by the neck, thus, reducing the possibility of bottles falling over during conveying process.
This machine is used to fill still water into pet bottle and with screw caps capping function.
This machine integrated three function: 1. Rinse the empty pet bottle, 2. filling the rinsed bottles, 3. capping the filled bottles.
Including Ink Printer,Automatic Sleeve Labeling Machine&Shrinking Tunnel and Automatic Shrinking Film Wrapper
The Features Of Labeling Machine:
(1) PLC control, full-automatic working;
(2) Touch-screen control panel, easy operate;
(3) Full cover Main engine:Make the operator safety work;
(4) Adjustable blade base: Unique cut off, double blade for long using life;
(5) Single positioned adjustable central transmission post, more stable label transmission;
(6) Screw rod of separate bottle: stable transportation of bottles;
(7) Label brushing set: more accuracy of label-casing precision;
(8) Label control sensor shelf: original creation tail surface and sensor are combined to improve the precision of cutting the material;
(9) Sensor control, no bottle no label insert;
(10) 304 stainless steel machine frame.
Parameters of Water Filling Bottling Machine:
|Main technical parameters |
|φ=50-110mm H=160 -310mm 200-2500ml PET bottles |
|Power ||2.42kw||3.12kw ||3.92kw||3.92kw||5.87kw||7.87kw||11.37kw||11.37kw|
1. Each water filling machine element tha contacts with the liquid is made of high quality Stainless steel 304, if needed, SS 316 is also available.2. The water filling machine adopts bottle neck holding transmission technology to realize fully automatic rinsing, filling and capping.
3. Most elements of the electrical system use famous international brand, such as Mitsubish, Omron brand.
4. The water filling machine obtain the advantages of good abrasive resistance,high stability,low failure rate, etc. The
quality of the equipments reaches the international advanced level.
5. Advanced technologies, human-machine interface touch screen and PLC program control are adopted in this machine.
6. Nozzles in the grab can guarantee the complete wash of the interior of the bottle.
7. Easy to operate, save the cost of workers.
View More Products,Clik Here...
With systems from FILLEX for filling non-sparkling water, you can rely on our high quality and ideal hygienic conditions combined with maximum cost and energy efficiency. Whichever container shape you prefer - we will find the best solution for your requirements.
More than 60 exporting countries, serving more than 180 customers, such as Thailand, Myanmar, Russia, South Africa, Turkey, Argentina, USA, Canada, Mexico, Australia, etc.
We already have 3 branches: Indonesia, Dubai, Saudi Arabia.
1 year quality warranty and supply spare parts at low cost for life span after sale. We keep the original
drawings of spare parts, so it can match with the rest part of machine.
2. 24 hours/365 days online technical service.
3. Training offered
Q1: Are you a trading company or a manufacturer?
A1: We have our own factory for many years,can give u best service.
Q2: What's your guarantee if we buy your machines?
A2: We offer you high quality machines with 1 year guarantee and free spare parts for 1 year. Meanwhile our engineers have rich experience and have gone to more than 50 countries for installation and commissioning.
Q3: When can I get my machine after I paid?
A3: We will deliver the machines on time as the date we agreed both side.
Q4: How can I install my machine when it arrives?
A4: Our engineer will go to your side as soon as you get your machines ready for testing and teaching your technicians how to run the machines.
Q5: What's the delivery time?
A5: 30-45 days after the T/T deposit or L/C.
Q6: Do you provide customized service?
A6: We can design the machines according to your requirements (material, power, filling type, container and etc), at the same time we will give you professional suggestion by many years industrial experience.