Application of machine
This machine is a special equipment used for honing cylindrical deephole parts such as various hydraulic oil cylinders and cylinders. M. It can also repair and Hole diameter accuracy of machined workpieces can be up to or over IT7 and surface roughness Ra0.2-0.4 maintain taper and ellipticity of machined workpieces with the hepl of partial honing.
Auto-cycle timing control unit is used on this machine during reciprocating honing so as to assure accuracy of machined holes and decrease the intensity of labour.
Sand blades and workpieces always maintain constant pressure during honing. It is a feature of high efficiency and strong cutting force. It can perform rough and finished honing of general cylindrical deephole parts after rough-boring. It can directly perform high efficiency honing of cold-drawing steel pipes. Traditional deephole processing is simplified by using this machine. Productivity is greatly in creased. Materials of honed workpieces may be casting iron or all kinds of steel including quench parts.
Cooling system of this machine adopts the method of three-step filtering in order to assure clearing of coolant. This machine is controlled by electrical operating center. It is easy, safe and reliable in operation.
It can perform not only honing of mass products but also small batch workpieces. It is a perfect equipment for Machining deep hole parts.
SPECIFICATION |
17603 |
17604 |
2M2125 |
2M2135 |
Range of honing dia. |
40-250mm |
80-350mm |
Max. honing depth |
12000mm |
12000mm |
Dia. range for workpiece clamping |
50-350mm |
100-420mm |
Center height |
350mm |
350mm |
Speed range of headstock spindle |
25-400rpm |
15-240rpm |
Reciprocating speed of honing box |
5-25m/min |
5-25m/min |
Speed of workpiece (constant) |
- |
10r/min |
Flow of reciprocating hydraulic system |
100L/min |
100L/min |
Max. working pressure of reciprocating hydraulic system |
5MPa |
6.3MPa |
Flow of honing head expanding system |
12.5L/min |
12.5L/min |
Max. pressure of honing head expanding system |
6MPa |
6MPa |
Volume of hydraulic system |
200L |
560L |
Flow of coolant pump |
100L/min |
200L/min |
Volume of coolant tank |
950L |
1200L |
Capacity of refrigeration |
- |
12000kcaph |
Motor power of honing box |
11kw |
15kw |
Motor power of workpiece rotating |
- |
4kw |
Motor power of reciprocating system |
11kw |
11kw |
Motor power of honing head expanding system |
1.1kw |
1.5kw |
Motor power of refrigeration pump |
0.25kw |
0.45kw |
Motor power of refrigeration set |
- |
3.7kw |