Suzhou, Jiangsu, China
Member Since: 2011
Business Type: Manufacturer/Factory
|Water supply Polyethylene(PE) pipe|
High density Polyethylene pipe
|HDPE silicon core pipe|
PE perforated tube
|Gas buried polyethylene pipe material|
PE underground cable sheath
|HDPE cable sheath |
HDPE double wall corrugated pipe
|1||The optimum spiral bush highly improves the output of extruder|
|2||Accurate temperature control system ensures material melting performance|
|3||Unique screw design achieves better plasticizing and high quality products|
|4||Precisely designed gearbox with a high torsion guarantees stable running|
|5||Advanced PLC operation system realizes synchronization and high quality products|
|6||Adopt automatic water temperature &level control and special independent filters on both vacuum and cooling tanks|
|7||Offer stable haul-off unit with 2-12 caterpillars|
|8||Provide saw &chip free cutting options|
|9||Low energy consumption, excellent performance, and easy maintenance|
|Model||Pipe range(mm)||Extruder Model|
|Pipe Extrusion Single Screw Extruder|
|Pipe Extrusion Die Head|
|Pipe Extrusion Vacuum Calibration Tanks|
|Vacuum Calibration Tanks are used for calibrating and cooling pipes made of thermoplastic materials by means of spray cooling. The spray cooling method prevents the formation of water boundary layers and is more efficient in cooling than the full water tanks.|
Furthermore, there are no buoyancy problems that could distort the pipe. Spray-cooling increases the heat exchange rate significantly, compared to full-water-bath cooling. However, optionally all tanks can be supplied as full water tanks.
|Pipe Extrusion Haul-off Unit|
Belt haul-offs are used for continuous extraction of pipes and profiles. They are known for especially consistent performance even at high production speeds. The belts are driven by brushless AC servo drives. Both belt carriers can be mechanically or pneumatically adjusted in height. The belts can also be supplied with a cellular vulcanised or rubber layer.
Depending on pad type, dual caterpillar haul-offs can be used for pipes or profiles. Multiple caterpillar haul-offs are used for pipe take-off. The lower caterpillar carriers are adjusted manually, the upper caterpillar carriers are suspended and are pneumatically adjusted.
Pipe extrusion Cutting Machines
Pneumatically activated radial saws suitable for cutting pipes and profiles. Easy operation of the saw on start-up of the extrusion line thanks to the possibility of raising the upper double pipe clamps. Clamping jaws according to the pipe diameter or profile shape guarantee an angular cut.
Pneumatically or hydraulically activated cutting knife for burr-free cutting of pipes or profiles.
For chip and burr-free cutting by means of rotating knife.