| yg6/K20 |
For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high |
| YG8/K30 |
For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high |
| YK08/K40 |
For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high |
| JX5/K20 |
For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high |
| YG6X/K10 |
For the cutting of the wood specially, recommend to use the high frequency welding |
| YG8X/K10 |
For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding |
| K10S |
For the cutting of the hard wood specially, Recommend to use the high frequency welding |
| K20S |
For the cutting of the aluminum specially, Recommend to use the high frequency welding |
| K10UF |
For the cutting of the plywood,board with middle to high density and the compound materials with aluminum and plasic, Use the high frequency welding |
| K20UF |
For the cutting of the aluminum specially, Use the high frequency welding |
| K30UF |
For the cutting of the stones specially, Use the high frequency welding |
| R06 |
For the cutting of the plywood,density board and the sandwich board, Use the high frequency welding |
| R03 |
For the cutting of the timber such as shaving board,laminated boar,density board and compound material etc, Use the high frequency welding |
| YC40 |
For the cutting of the large cast materials, Recommend to use the high frequency welding |
| YC501 |
For the cutting of the steel and the stainless steel, Recommend to use the high frequency welding |
Audited Supplier 
){kind=link}
){kind=link}