Good Quality Labeling Machine for Bottled Water
This labeling machine is mainly for PVC, PET. OPS label, belongs to sleeve labeling machine.
The machine adopts combination designing of modularization, and makes the machine better. The height adjustment adopts motor fluctuating. It is convenient to replace the material. The special cutter head design is good for the cut.
-Infeed and outlet Conveyor
-In feed star wheel
-Timing screw part
-Label roll stand part
-Hot melt gluer
-Discharge start wheel
-Label cutting knife
-Air and lubrication part
-This is roll-fed type labeler where label is supplied from roll.
-Labels loaded in roll stand are pulled through guide rail and roller by feed roller.
-Sensor detects I-mark during labels go through feed roll.
-Location of I-Mark is recognized, then the corrector calibrates & controls the speed of feeding roller and decides the correct cutting point on label.
-After passing feeding roller, the labels come into & are cut in label cutting part, and cut labels are delivered to vacuum drum.
-When vacuum drum turns and sensor detects labels on vacuum drum, hot metl glue roller goes into & put the glue on labels.
-Glued label is delivered to main drum and faces to bottle coming out of timing screw with regular distance. Labeled bottles are transferred through side belt which presses label in perfect and are discharged.
|Max. label width||100mm|
|Reel inner diameter||75mm|
|Reel outer diameter||300mm|
|Labeling speed||2500-4200pcs. /min|
|Overall dimension||2400× 1650× 1540mm(L× W× H)|
|Power required||110 or 220 VAC; 50/60Hz; 1 Phase|
|Power consumption||200VAC± 5%; 50Hz; 168kw|
The initial installation is not included with the professional member. All installation with our team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled.
While our professional member arrives at the site for a completed and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days . The actual installation days many vary, based on different machine mode and packing lines. Each day of working hour consist at 8 working hours. Any additional day will be charge according to our service fee listed below.
When initial installation is being called for our professional member required, the surcharge will be made advance by the purchase at US$80/person/day plus all travel expenses. Travel expenses include documentation fees visa charge); local and destination transportation charges air, train, ferry, bus, taxi or any means of transportation required to arrive to/from destination); accommodation (minimum of 3 star hotel facility) and 3 daily hot meals.
If translator is required and can't be provided by purchaser then we will provide a translator for same charge as initial installation stipulated above. All communicate with our engineer should be in Chinese. Any translation provide by us will be based between English and Chinese only. Purchaser is responsible for the translation between local language and English.
All parts are under two Year Warranty with defects from manufacturer. Any other defect caused by human error, mishandling, wear-and tear & any foreseeable conditions will not be covered by this warranty. All electronic parts and component can be guaranteed by original part's manufacturer or our company.
30% of the total contract amount is to be T/T into assigned account at the period of 5 working days after the Purchase contract is signed.
70% of the balance must to be made via T/T of the remainder balance amount of the purchase contract before the ordered equipment is to be delivered 10 working days prior of the shipment.
We also accept L/C payment, 30% down payment, and 70% L/C at sight