This machine can produce different thickness of bended and melted glasses.Such as glass furniture,glass lights cover,glass tableware,fruits plates,mosaic etc.It is high precision,craft stablility.Circulation continuous production.High yield,high efficiency,suitable for large glass deep-processing factories.Advantages1 Production of continuous, short cycle, large output, high quality.
2 The use of counter-current principle of work, so the heat utilization is high, fuel economy, because the heat to maintain and use of waste heat are very good, so the fuel is saving, compared to the flame kiln can save fuel about 50-60%.
3 Firing time is short, more ordinary kiln by the kiln to empty space takes 3-5 days, and tunnel kiln about 20 hours or so can be completed
4 Save labor. Improve the working conditions of the operator, reduce the labor intensity.
5 quality improvement. Preheating zone, firing zone, cooling zone three parts of the temperature, often to maintain a certain range, easy to master the firing law, so the quality is better, the damage rate is also less.
6 Kilns and kilns are durable. Because the kiln is not affected by the impact of rapid cooling, so the kiln life is long, usually 5-7 years before repair.
7 Adapt to many varieties of small batch production
8 The use of light-walled kiln wall structure, lined with high temperature light material
9 The loading and unloading brick is carried out outside the kiln
10 Heating up, cooling speed, firing cycle is short.
11 Can be equipped with appropriate prosecution instrument, using PLC control, to achieve full automation operation.
12 Ceramic heat exchanger high temperature, corrosion resistance
13 Ceramic heat exchangers are metal heat exchangers several times or several times
14 Ceramic heat exchanger not only can achieve the purpose of energy conservation, but also improve the environmental benefits.Parameters:
|1||Machine installation size||32000*1450*1250mm.|
|2||Belt width||1200 mm.|
|3||Stainless Belt||310 Stainless|
|6||The use power||200KW|
|7||Height from belt to heaters||150MM|
|8||Height from ground to belt||750MM|
|9||Numbers of Control||3 Control Checking Points in the Heat|
|10||Controller||Touch Screen is used for control and show|
temperature as you told me, but the four fans and belt move is controlled by manual on the control box by switch or bottom.
|11||Machine inner size||L28000MM, W12000MM, H150MM|
|12||Speed (Around)||Plates 4min/meter,|
Mosaic glass finished product