Business Type: Manufacturer/Factory
Wenzhou, Zhejiang, China
1.Independently motorized servo motor control, simultaneous feeding mode with the main motor.
2.Feeder section equipped with three pieces
feeding knife, adjust the asymmetrical length as per the box sample.
1.The paper board sent from feeder section will be corrected by aligner section to ensure transmission accurately.
2.Pressing drive pressure can be adjusted up and down to accommodate different paper board thickness.
1.Special first folding line pre-fold 180°.Third line 165°,which perfectly meeting the requirements of automatic packaging industry.
|Lock bottom section|
1.Complete set of folding hooks and helixes to fold the front flaps of the blank smoothly and accurately.
2.Bottom lock section with three board, which can better apply to the large rash lock bottom box forming.
|Lower gluing tank|
1.lower gluing tank is large volume.
2.Easy to remove and clean
3.Electronic upper gluing system by guns.
|Folding and Pressing|
1.The Second and fourth folding line 180°
1.Up and down belt can be adjusted separately.
2.Equipped with photo electronic counting device and kicking paper device, which can press the paper after accounting and make it easy to pack. Also equipped with feeding paper inspection device.
1.Equipped with special additional sponge belt for the press of boxes valley part.
2.Upper section moves back and forward, allowing for different box length.
3.Pneumatic pressure regulator ,which can effectively ensure the uniform of fitting pressure, makes machine easy to adjust.
|4 and 6-corner device|
Special device fpr small boxes perfect forming.
|Paper material||Cardboard 210-800g, A.B.E Corrugate.|
|Thickness of folded box max||12mm||20mm||20mm|
|Compressed air||6 bar||6 bar||6 bar|
|Air compressor capacity||10m3/h||10m3/h||10m3/h|
|Air tank capacity||60 L||60 L||60 L|