Shenzhen Chitongda Electronic Co.,Ltd.
Address:Block2, Chitongda Group Technology Park, No.108 of Baoshi WestRoad,Shiyan Street, Bao'an District, Shenzhen, China
|
FD-02 Enhance Wireless Alarm Signal Receiver and Transfer Signal Wireless Rf 433 MHZ Signal Booster
1.If he distance get too long between the alarm host and sensors, it will results in wireless signals
didn't be transferred well, you can use this wireless repeater to solve this problem.
2.You just need to install this wireless repeater in the suitable place between alarm host and sensors, and just make the antenna out, then connect the power..
3.If the distance between the alarm host and sensors get too long, you can put this wireless repeater in each long distance place.
4.If the wireless repeater didn't get signals, LED light won't be on, and it will be on for 2 seconds if get signal successfully.
5.Normally, the distance for wireless repeater to get\transfer signals is150 to 300 meters, so, the signals can be transferred from sensors to alarm host successfully if within this distance.
Features & Functions:
1 Installing it around the wireless detector; extend the transmitting distance of wireless detector;
2 wireless connection with host;
Technical Parameters:
1 Working voltage : DC12V;
2 Working current : 180mA;
3 Can study detectors' quantity : 30 ;
4 Receiving distance : 100m;
5 Launch distance : 500m
6 Size : 16*9*8cm;
7 Weight : 200g
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}