Fast Military Army Comfortable Level Iia Ballistic Bulletproof Helmet
Military and Army
THE BALTIC CASH, model "FAST LE HIGH CUT HELMET"
Purpose: Provide reliable protection for employees from hits and bullets, with increased mobility and functionality. Accessories of helmet:
1.1. Side rails for accessories - (two rails included); 1.2. Night vision goggle mount, "L3 Insight Technology" model, model "AN / PVS-15" - 1 or equivalent glasses with 2 security elastic lines; 1.3. System extender, model "CBRN Mask Extender", for joint use of "M95" gas mask or equivalent;
Ballistic protection requirements for the helmet:
The helmet has a level of protection IIIA in accordance with standards NIJ-STD-0106.01 and NIJ-STD-0108.01 or equivalent standards.
To provide 100% protection against hits and rebounds of bullets with soft heart, pistols and revolver cartridges as follows:
According to standard NIJ-STD-0106.01 or equivalent; 9mm para FMJ, bullet weight 8.0 ± 0.1 gram, test tube length 10 to 12 cm, initial bullet velocity 358 ± 15 m / sec. According to standard NIJ-STD-0108.01 or equivalent; 44 Magnum Lead SWC Gas Checked, bullet weight 15.55 ± 0.1 gram, test tube length 14 to 16 cm, initial bullet velocity 426 ± 15 m / s .;
Provide shield protection in accordance with standards PS - 1118, MIL - STD - 662F or equivalent. Bulk weighing 1.1016 grams (17 grams FSP) at speed V50 = 670 m / sec.
Requirements related to the purpose of the ballistic helmet:
To ensure compatibility with the standard models of active anti-phonemes (Peltor mod. Com Tak), to have a base for mounting AN / PVS-15 night vision goggles, to allow the wearing of M95 or equivalent, to have side rails for mounting accessories and accessories.
Have a quick release lock.
There are four belt length regulators (from the underlying system) to position the helmet on the head.
To have kinetic energy absorbing energy for the head and head, resistant to moisture and various temperature influences.
The padded belt is lined with leather and offer the possibility of two wearing modes:
Non-gastight helmet carrying mode - the strap covers the operator's front and bottom chin to securely secure the helmet;
Breastfeeding mode - the strap extends with the "CBRN Mask Extender" to cover the operator's chin from the bottom, not interfering with the set gauge, but provides a sturdy attachment to the helmet.
The materials from which the helmet has been made are flame-resistant according to ACH CO / PD 05-04: 2007 or equivalent (equivalence for protection under the same conditions and test methods).