Shenzhen, Guangdong, China
Member Since: 2016
Business Type: Trading Company
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to lack of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
|Introduction To Mobile Phone Signal Repeater|
|1. Enhance Mobile Phone Signal Strength|
|2. Improve Communication Quality|
|3. Reduce Cellphone Radiation|
|4. Protract Cellular Battery Life|
|5. Economic Building Cost|
|6. Easy Operation|
|7. Easy Installation|
|8. Build-in Power Supply|
|Frequency||900/1800/2100MHz (Band 5/Band 3/Band 1)|
|Frequency Range||Uplink: 890-915/1710-1785/1920-1980MHz|
|Power Supply||Input AC100V-240V 50/60Hz 1.5A|
|Output 12V 3.0A|
|Pass Band Ripple||≤3dBi|
|Connector Type||N female connector|
|Reliability||To the GB6993-86 standard|
|Electromagnetic Compatibility||To the ETS300 694-4 standard|
|Function||a) Power supply LED denote|
|b) Export power LED denote|
Triband GSM/DCS/WCDMA 900/1800/2100MHz Mobile Signal Booster Packing List:
|Triband repeater with power adatper||1|
|Outdoor log periodic antenna||1|
|Indoor ceiling antenna||1|
|15meters LMR300 cable with connectors||1|
|5meters LMR300 cable with connectors||1|
1.Fix up outdoor antenna reception on housetop and point to signal tower.
2.Connect outdoor antenna to "outdoor" port in repeater machine through cable.
3.Connect indoor antenna(s) to "MOBILE" port in repeater through cable also.
4.Plug power adaptor into AC power socket and finish installation.
Triband 2G 3G 4G Signal Booster Technical Support:
1.Please make sure the outdoor antenna is well isolated with the indoor antenna(s). They should not be on the same horizontal line. The outdoor antenna should be on the housetop, at least 10 meters far away from the indoor antenna(s), better with stairs or wall(s) in between. Put the indoor antenna(s) in the middle of room, far away from the window and door.
2. If still no signal reception after activating repeater, please check if outdoor antenna points to signal tower or elsewhere have strong signal and check if strength achieve -70dBm. Please adjust the direction of the outdoor antenna until it catches good and steady signal. To ensure the result, the outdoor signal should be as strong as possible.
YOU MAY NEED...