Qingdao, Shandong, China
Member Since: 2018
Business Type: Manufacturer/Factory
|Impeller,guide cover, shaft, support,main body :ss304|
Bearing: Japan NSK, Mechanical sealing: Burgmann
|Supply scope : main body , impeller, guide cover, shaft, mechanical seal, bearing chamber, 7m cable ,|
Additional installation bracket
|Power supply: 380V / 50 Hz / 3ph|
|Note: our advantage than other supplier:|
Ours is adopt Germany ABS technology, very similar to Germany.
Our mixer is Cast & Forged workpiece, from inner parts rotor stator to external parts bolts nuts all use SS304 except enamelled wire.
Other supplier use stamping parts with low service life.
1, for the casting parts mixer which don't have welding joint, due to submersible mixer need working long time underwater,
if use metal Stamping mixer, after working some, the media may enter into main body inner (even if it has better sealing), it will bad for main body.
2. if the mixer installation tank has corrosivity or with high organic ingredients, the matel stamping parts only can make surface anti-corrosion, and can't make innter anti-corrosion; the casting parts can make long time inner and external anti-corrosion;
3. the casting parts mixer thickness is bigger than matal stamping piece.
4. the casting parts mixer equip floating swith, Oil-water probe, thermistor protection,but for the stamping piece can't equip it.