FDA material PES pleated 0.2 micron filter cartridge
PES series is constructed of imported polyethersulfone (PES)membrane media and nonwoven support materials. The materials of cage, core and end caps are polypropylene. Adaptors are thermally welded with media, so there is no possibility to cause pollution.
1.Flushed with EUI pure water
2.100% integrity test
3.Bubble point test
Excellent performance of chemical compatibility
Hydrophillc membrane with high flow
Non-fiber releasing according to pharmaceutics and food industry requirements
Experiencing 100% integrity tested
Flushed with ultrapure water
Food and beverage
Removal rating: 0.2um, 0.45um,
Length: 10'', 20'', 30'', 40''
Outside diameter: 69mm, 83mm, 131mm
Maximum operating temperature: 85temperature
Maximum operating pressure: 4.2bar @25temperature
Maximum operating pressure (Reverse Direction): 2.1bar @ 25temperature
Maximum temperature sterilization: 20times, 30minutes cycles at 121temperature
Flow Rate vs. Differential Pressure
PES, Rating: 0.22um, Length: 10", -222 flat end, seal material: Silicone.