Automotive Electrical System Trainer Engine Fuel Control System Training Board Equipment

1. Product introduction:
The training system is based on the real corolla electronically controlled gasoline engine system, and integrates all relevant sensors and actuators into a teaching board, which systematically demonstrates the working principle of the electronically controlled gasoline system. It can carry out practical training operations such as ignition and fuel injection demonstration experiments, fault diagnosis, and data measurement.

2. Features:
1) The real and operational automotive electronically controlled gasoline engine system fully demonstrates the composition and working process of the automotive electronically controlled engine system.
2) A digital display table is installed on the panel of the training platform, which can display the real-time changes of the engine sensor parameters in real time.
3) The color inkjet circuit diagram is drawn on the measurement panel of the training bench, and the detection terminals are installed, which can directly detect the electrical signals of the pins of each sensor, actuator, and engine control unit on the panel, such as resistance, voltage, current, frequency signals, etc. .
4) The training bench is equipped with a fault setting system, which can set one or more common faults to simulate the circuit fault of the electronically controlled engine system, so as to achieve the purpose of examination and assessment.
5) The training bench is equipped with a diagnostic seat, which can be connected to a dedicated or general-purpose car decoder, and implements self-diagnosis functions such as reading fault codes, clearing fault codes, and reading data streams for the electronically controlled engine system.

3. Materials and craftsmanship:
1) The measurement panel of the training bench is made of high-strength acrylic sheet with a thickness of 8mm, which has the characteristics of large temperature difference resistance, wear resistance, moisture resistance, corrosion resistance, not easy to deform, long service life, bright color, and not easy to fade.
2) The training bench is welded with international standard steel, which has the characteristics of high strength, corrosion resistance, long life, etc., and the appearance is more beautiful and high-end.
3) The base of the training platform is made of steel structure, with two practical and beautiful drawers, which can be used to store daily teaching supplies.

4. Teaching content:
1) Knowledge of the configuration and composition of the electronically controlled gasoline engine system
2) Understand the control principle of the electronically controlled gasoline engine system
3) Master the basic knowledge of electronically controlled gasoline engines
4) Master the working principle of electronically controlled gasoline engine
5) Be able to independently enumerate and explain the components of the electronically controlled gasoline engine system
6) Master the working conditions of the sensor and actuator of the electronically controlled gasoline engine system
7) Independent troubleshooting, maintenance and repair of electronically controlled gasoline engine systems

5. technical parameters:
1) Dimensions: 1600×700×1800mm (length×width×height)
2) Input power supply; AC 220V±10% 50Hz
3) Working power supply; DC12V
4) Demonstration liquid: Diesel