|Max. Sheet Feeding Size(mm)||1060×760|
|Min. Sheet Feeding Size(mm)||400×360|
|Max.Die Cutting Size(mm)||1050×750|
|Chase Inner Size(mm)||1100×790|
|Thickness of Sheet(mm)||Cardboard:0.12-2.0|
|Max.Fitness of Warp(mm/m2)||40|
|Max.Working Pressure (T)||300|
|Dimensions size(mm) W×L×H||7690×3800×2330|
Features and Function:
High speed conveying paper section:
1.German technology precision feeder head, cardboard and corrugated paper. Four suction and four delivery, can adjust paper suction angle and height according to paper deformation to ensure high-speed and smooth conveying of cardboard and corrugated paper.
2.Advanced double-side push-pull dual-purpose side gauge, adopting end cam mechanism, low wear, high stability, accurate paper positioning, quick and convenient switching of push-pull function.
3.Fine adjustment of the paper feeding table, which can be adjusted at any time according to the paper condition.
4.Electromechanical double detector.
5.Paper feed without stopping, and equipped with a pre-printing device.
6.Germany SAMPLA imported paper belt.
7.Erdao Feida head super high anti-collision detection device provides strong and guarantee for the safety of the paper feeding table and the feeder head.
8.Unique paper-feeding mechanism for different textured papers.
9.Super wear-resistant paper feed wheel and imported paper feeding belt make the fish scale paper feeding more accurate and fast.
10.Dual-use paper table, can be used for manual paper loading, or can be directly used for forklift paper.
11.When there is a fault in the process of conveying paper, the Feida part is separated from the main engine part by the pneumatic single-point clutch and stops running, the main machine runs normally, the service life of the whole machine is improved, and waste products are reduced. This feature makes proofing layouts easier.
1.The pressure-bearing part is high-strength ductile iron QT500-7, which is cast by special process, high strength and never deformed.
2.Japan imported high-grade alloy steel crankshaft processed by special process.
3.Germany SEW manufactures super wear-resistant worm gears and worms.
4.Precise pressure regulation system for easy adjustment while the machine is running.
5.Four-claw connecting rod design with super heavy load (pive shaft Φ70*240), high die cutting pressure and small wear.
6.The variable frequency speed control motor drives the imported worm gear and worm to make the machine run smoothly and low noise.
7.Unique side positioning design allows each row of teeth to be positioned on a single positioning line.
8.The gripper positioning compensation mechanism ensures the stability of the die cutting precision.
9.Fine-tunable front and rear positioning system for precise positioning and easy adjustment.
10.The scissor die-cutting of the moving table makes the die-cutting pressure of the machine uniform, and the pressure is large. The German imported torque limit is over-cut protector, which avoids the damage caused by unexpected events to the machine, ensures the safety of the machine and the safety of the personnel.
11.Convenient and quick knife template turning device.
12.Powerful oil lubrication system, main chain microcomputer controlled automatic intermittent lubrication.
13.Italy Columbo high-precision 240-degree intermittent mechanism drags the five rows of rows of teeth to run smoothly, with accurate accuracy and low noise.
14.Italy OMPI imported pneumatic clutch device.
15.Japan SMC high speed rotary joint.
16.Germany IWIS brand gripper chain, the relative strength is increased by about 45%, long service life.
1.Automatic paper-making device to ensure that the paper pile is neat.
2.Main chain protection device.
4.Accurately control the automatic lifting and receiving of the delivery pile through the photoelectric detection switch.
5.Receiving paper to assist the blowing device to ensure that the paper is neatly received.
6.Pick-up brush deceleration device for quick and easy adjustment.
7.The sampling device can check the quality of the processed parts at any time and reduce the scrap rate.
1.The triple-coupling waste stripping device is harmonious, precise and powerful, and can effectively remove all kinds of special-shaped waste materials.
2.Double-layer drawer type scrapping upper and lower molds can be quickly loaded and unloaded, and the stripping tools can be adjusted.
3.Easy to adjust the middle frame stripping template.
4.Upper frame adopts pneumatic control lifting device.
5.Standard waste-cleaning needle and elastic ejector, combined into a perfect action of "rush-pull".
6.Intermediate positioning plate structure matching the intermediate positioning structure of the die-cutting part, simplifying the plate changing procedure, ensuring accurate plate-changing positioning and improving production efficiency.
7.Clearing the waste corners can be done either by means of cleaning up and down the scrap or by clearing the yin and yang template.
8.The stripping frame is made of aviation aluminum alloy, which is light in weight, high in strength and never deformed.
9.The waste frame guide rail adopts Taiwan imported high-strength linear guide rail, and the operation is stable and accurate.
10.The upper and lower stripping boxes can be trimmed horizontally, which is convenient for the version.
Electrical Control Department:
1.The machine realizes man-machine dialogue through the touch screen, and the operator can easily eliminate various faults in the mechanical operation according to the prompt of the touch screen liquid crystal display window, and can read various technical materials of the machine. The whole machine is monitored and displayed by PLC and touch screen for the operation and fault of the whole machine. All protective doors and windows have safety alarm system to ensure personal safety. The main motor adopts German Siemens high horsepower low energy motor.
2.Main and auxiliary paper feeding and delivery motor are Taiwan's Shan State geared motor.
3.Fuel pump for Taiwan Weiliang.
4.The gas pump is produced by Sino-German joint venture Shanghai Yunwang Co., Ltd.
5.Advanced PLC and human-machine interface control system to ensure safe and accurate monitoring of all parts of the machine.
6.Electrical components and electrical circuits adopt advanced European and American national safety standards (CE standards).
7.The main electrical components are all internationally renowned brand products to ensure the reliability of control.
|NO.||Part Name||Brand||Place of Origin |
|1||Human machine interface||Delta(10.4 Inch-TFT)||Taiwan|
|2||Molded base plate||DAE DONG||Korea|
|5||Main gripper chain||IWIS||Germany|
|8||Main solenoid valve||SMC||Japan|
|13||Circulating lubrication cooling system||TSWUKWAM||Taiwan|
|15||Torque limiter||TONG SHIN||Taiwan|
|16||Crankshaft material||Nickel chromium molybdenum alloy steel||Japan|
|28||Main paper feed motor||CPG||Taiwan|