Jinan, Shandong, China
Business Type: Manufacturer/Factory
Type of technology | Positive displacement blowers |
Design | Positive pressure |
Air capacity | 5.37 to 12.48 m³/min |
Discharge Pressure | 9.8 to 58.8Kpa |
Medium | Air, Neutral gases |
Conveying | Oil-free |
Weight | 235kg |
Discharge Diameter | 125mm(or customized) |
No. | Name | Material | Q' ty | No. | Name | Material | Q' ty |
1 | Shell | HT200 | 1 | 14 | Z sealing ring | Nitrile rubber | 1 |
2 | Impeller | HT200 | 2 | 15 | Gear | 35CrM | 2 |
3 | Drive shaft | 45Cr | 1 | 16 | Gear lock washer | Q235 | 2 |
4 | Driven shaft | 45Cr | 1 | 17 | Gear lock nut | SS400 | 2 |
5 | Drive side siding | HT200 | 1 | 18 | Gearbox | HT200 | 1 |
6 | Gear side siding | HT200 | 1 | 19 | Sleeve | 45 | 1 |
7 | Drive bearing | NSK | 2 | 20 | End cover | Q235 | 2 |
8 | Driven bearing | NSK | 2 | 21 | Pin | 45 | 1 |
9 | Sealing ring | Nitrile rubber | 2 | 22 | Plug | 35 | 1 |
10 | Sealing ring | Nitrile rubber | 2 | 23 | Oil gauge | 1 | |
11 | Bearing sleeve | 45 | 4 | 24 | Vent | 1 | |
12 | Bearing cover | HT200 | 1 | 25 | Grease nipple | C3605 | 2 |
13 | Bearing cover | HT200 | 1 | 26 | Gearbox seals | Barley paper | 2 |
Water Treatment | Aquaculture | Powder and granules transportation |
Be used in water treatment plant for water purification and sediment mixing | Be used in a variety of fish pond for oxygen supply and mixing, and also for aquariums and live fish tank | Powder or granules (such as plastic materials, etc.) can be transported by pressure or vacuum |
Incinerator | Ballast pump | Sandblast |
Air combustion and exhaust emissions | Used for chemical liquid unloading and other ballast pumps | Used as air source for blast jet |
Booster | Compost fermentation | Cereals Transportation |
Used for high-pressure exhaust to make the gas into tiny molecules | High-pressure air take into the livestock manure tank to increase contact area of livestock manure and air , also apply to sewage treatment | Cereals such as wheat are transported from the rotary pilot valve with air |
Pipe clearing | Sauna | Plating Bath |
Used to remove dirt and iron dust during pipeline replacement or overhaul | Used for the sauna to provide air bubbles, mainly used for hospitals, hotels and etc. | Use air to stir the electrolyte to keep the electrolyte circulation, and disperse the attached blister to make plating quickly, spread evenly |
Produce line drying | Car wash dry | Smoke exhaust |
Quickly remove the water or oil on the cleaned items | Dry the car after washing | Exhaust smoke quickly to reduce pollution |
Stripping from mold | Air cushion of Cut off machine | Dry air knife |
Easy to remove the finished product after stamping | Increase buoyancy, easy to move | Use the blower to blow off the tiny dust and water droplets on the circuit board |
Feed paper/cloth | Washing machine blow dry | Gas /heavy fuel injection |
Collect plastic, cloth, paper and other scrap generated after trimming | Dried bottles after washing, suitable for food industry | Provide high pressure (2000 mmAq) and sufficient air volume |
Malfunctions | Reason | Solution | ||
Blower | Can not rotate | Can rotated by hand | The motor is damaged | Repair or replace the motor |
Can rotated round by hand | The lobes are locked | Open to repair | ||
The impurity in blower | Open to clean | |||
Can rotate | Abnormal sound or vibration | Skid, v-belt is too tight or too loose | Adjust v-belt tension | |
Pulley offset | Reset pulley | |||
Pulley and belt cover friction | Adjust belt cover | |||
Bearing oil lack or aging | To replace the oil | |||
Gear oil lack or aging | To replace the oil | |||
The safe valve leakage | Adjust the safe valve | |||
Foundation insufficient strength | To strengthen the foundation strength | |||
Piping resonance | Eliminate by the silencer and support | |||
Exhaust pressure rises abruptly | See *annotated | |||
Anchor bolt is too loose | Tighten | |||
Rotor interference | Open to repair | |||
The impurity in blower | Open to clean | |||
Check valve bad | Replace | |||
Overheating | Exhaust pressure rises abruptly | See *annotated | ||
Temperature of working environment exceeds 40 ºC | Ventilated working environment | |||
Inlet silencer obstruction | Cleaning/replace filter | |||
Airflow insufficient | Pipeline leaks | Tighten the pipe connection | ||
Inlet silencer obstruction | Cleaning/replace filter | |||
The safe valve leakage | Adjust the safe valve | |||
V-belt is too loose | Adjust v-belt tension | |||
Exhaust pressure rises abruptly | See *annotated | |||
Exhaust pressure rises abruptly | Shut off the valve | Fully open the valve | ||
The water level rises | Adjust water level | |||
Inlet/outlet pipe jams | Cleaning debris | |||
Valve bad or twist reversed direction | Replace or reverse direction twist | |||
Airflow overpowered | Reduce round speed or exhaust | |||
Oil leak | Lubrication oil overmuch | Refuel to the center of oil standard |