Self-adhesive fiberglass mesh tape(also called drywall joint tape) is made of fiberglass mesh that is coated with adhesive latex.It's the most ideal material for cracks repairing on the drywall,and joints strengthening on the ceilings,gypsum boards,ect.Comparing to the paper tape which is widely used on the market,its much easier to use, no bubbles or blisters,and can be applied directly to the wall surface without pre-embeding required. Its tensile strength is up to 600N/50mm which is much stronger than paper tape. Furthermore, it's mom-organic,mold-resistant,long dyrability,which prevents the possible break that happens to paper after 3-5years.
Technical Data Sheet
| Density|| 65±3g/m2||75±3g/m2 |
|Glue Content||30% ||30%|
|Glue Type||Adhesive latex||Adhesive latex|
|Moisture||<=0.5% ||<=0.5% |
Packing & Loading
|Material||Fiberglass mesh |
|Roll width||50mm(2inch),100mm(4inch), 150mm(6inch),200mm (8inch)|
|Available colors||white, yellow Blue,green,red,ect.|
|Diameter of paper core||50mm,75mm|
|Application||Drywall repairing, gypsum board jointing,cracks repairing|
Every roll with a round label, then shrunk wrapped and put in boxes.
Quality DemoInstallations Proces Step1 Step2 If the gap is bigger than 5mm, it's better to fill in Cover the gap or cracks with drywall tape
|Roll size||Pack (Boxes)||Loading quantity for 20 ft|
|50mm x 20m||24 rolls / box||1056 boxes|
|50mm x 45m||54 rolls / box||780 boxes|
|50mm x 90m||60 rolls / box||1050 boxes|
the gap with compound before applying the tape. and make sure it's fully covered, then cut off There are a lot of ready-to-use and all-purpose the tape.
compound on the market,but quick-dry type is
strongly recommended, otherwise it delays
the project. Step3 Step4
If the project is big, it's recommended to use Make sure every seam is completed covered
a tape gun which is much easier and faster by self-adhesive tape
to use with auto-cut. Step5 Step6
Apply a layer of compound to the surface Put the remaining tape into sealing bag to and make sure the tape is fully covered. to prevent drying out and prepare for future useExhibitionOur Company
Fiberglass Yarn Drawing Workshop Fiberglass Roving Twisting Workshop
We have 140 units of plantinum crucibles After fiberglass roving is produced, the next
for the production of fiberglass yarn. procedure is twisiting to make the roving more stronger.