Tosilon Coriolis Mass Liquid Flowmeter for Bitumen Emulsion Fuel (Ex Approved)
Design and Manufacturing according to CE, ATEX Standard
Introduction
Coriolis Mass Flowmeter measure the force resulting from the acceleration caused by mass moving toward (or away from) a center of rotation. This effect can be experienced when riding a merry-go-round, where moving toward the center will cause a person to have to "lean into" the rotation so as to maintain balance.
TMFW Series Coriolis Mass Flow Meters have applied the pure digital drive, DSP signal processing, and the high vibration frequency. The DMFW-Series Coriolis Mass Flow Meters have characteristics of high stability, high shock resistance, fast response, high accuracy, low pressure lose, multi-parameter measurement (including: mass flow, density, temperature, percentage), etc. The accuracy of the Coriolis Mass Flow Meters is ±0.1%~ ±0.2%. The application range is large. (It could be used to measure all sorts of all sorts non-newtonian fluid, slurry, suspensions, high viscosity fluid, etc.) The requirements for the installation are low. (The straight pipe requirements in front of and behind the Coriolis Mass Flow Meters are low.) They are more reliable, stable, and the maintenance level is low.
General Technical Parameters (For More Details, please contact Tosilon)
Applications
Suitable for Liquid, Gas, Liquid- Solid, Gas- Solid, Liquid- Gas Mass Measurement or volume measurement
Material of the Measurement Pipeline
SS 316L/ HC Hastelloy
Process Pressure
0-4MPa, Special orders would be placed for high pressure.
Medium Temperature
-50 oC ~ +150 oC; -50 oC ~ 250 oC; -50 oC ~ 350 oC; -100 oC ~ 350 oC
Environment Temperature
Sensor: -40 oC ~ +150 oC; Transmitter: -20 oC ~+ 70 oC
Flow Rate Measurement Accuracy
± 0.2% , ± 0.1% optional
Density Measurement Accuracy
±0.002g/cm³, ±0.001g/cm³ optional
Repeatability
±0.10% Flow Rate ±[½(Zero Point Stability/Flow Rate)×100]% Flow Rate
Output Signal
4~20mA Load Resistance <500Ω(Instantaneous or Density optional); 0~10kHz Instantaneous Flow Rate Pulse Signal; Standard RS 485 Communication
Explosion- Proof Symbol
EX d ib II C T5 Gb
Anti- Explosion Certification No.
CE14.1262
Outline Structure
For more information, please contact Tosilon
Your Global Partner for Automation
tosilon.en.made-in-china.com
Applications | Suitable for Liquid, Gas, Liquid- Solid, Gas- Solid, Liquid- Gas Mass Measurement or volume measurement |
Material of the Measurement Pipeline | SS 316L/ HC Hastelloy |
Pressure | Please refer to the chart shown above. Special orders would be placed for high pressure. |
Medium Temperature | -50 o C ~ +150 o C; -50 o C ~ 250 o C; -50 o C ~ 350 o C; -100 o C ~ 350 o C |
Environment Temperature | Sensor: -40 o C ~ +150 o C; Transmitter: -20 o C ~+ 70 o C |
Flow Rate Measurement Accuracy | ± 0.2% , ± 0.1% optional |
Density Measurement Accuracy | ±0.002g/cm³, ±0.001g/cm³ optional |
Repeatability | ±0.10% Flow Rate ±[½(Zero Point Stability/Flow Rate)×100]% Flow Rate |
Output Signal | 4~20mA Load Resistance <500Ω(Instantaneous or Density optional); 0~10kHz Instantaneous Flow Rate Pulse Signal; Standard RS 485 Communication |
Explosion- Proof Symbol | EX d ib II C T5 Gb |
Anti- Explosion Certification No. | CE14.1262 |