Brief introduction:
Diesel multistage pump set is composed of diesel engine, pump, base and control cabinet. It is a product integrating information processing technology, industrial automation control technology and mechanical technology.According to different requirements of customers, the unit can realize automatic start, automatic stop, automatic speed regulation, automatic alarm, automatic charging, parameter detection, automatic inspection, remote control and other functions.
Parameters:
Pump working range:
- Flow rate:Q=3~846m3/h
- Total head:H=50~1450m
- Speed:n=1450rpm/2950rpm
- S.g.:γ ≤1.15
- Temperature:T=-20~160ºC
- Pump diameter:80,100,125,150,200,250mm
Operating range of diesel engine:
- Environment temperature: T=-25~55ºC
- Relative humidity : <85%
- The degree of longitudinal inclination at work :<10°
- No conductive dust and damage to metal insulation corrosion gas and explosion risk.
- If the ambient humidity is more than 20ºC or the relative humidity is more than 30% or the altitude is more than 1000 meters, the diesel engine power should be corrected. The correction coefficient is selected according to the data table provided by the diesel engine manufacturer
Features:
- Advanced hydraulic models with high efficiency and wide performance range.
- Smooth operation and low noise.
- Both packing seal and mechanical seal are available.
- Completely sealed shaft which is non-contact with fluid.
- The pump material can be changed to pump corrosive fluids. D(F) stands for a pump which is suitable for corrosive fluids,but its performance and is totally the same to D series.
Structure:
- Advanced hydraulic models with high efficiency and wide performance range.
- Smooth operation and low noise.
- Both packing seal and mechanical seal are available.
- Completely sealed shaft which is non-contact with fluid.
- The pump material can be changed to pump corrosive fluids. D(F) stands for a pump which is suitable for corrosive fluids,but its performance and is totally the same to D series.
Structure drawing is as below
Configuration:
Application:
1. Diesel multistage pump is mainly used for fire water supply.
2. Widely used in mine drainage, urban drainage, water supply pipe network pressurization, high-rise water supply, garden irrigation, refrigeration system water supply, urban drainage.
3. It is suitable for pumping clean water and liquids with close physical and chemical properties of water, or liquids such as hot water, oil, corrosive substances and particles.
){kind=link}
){kind=link}