Concrete Grade Level Dyestuff is a new product, which is non-toxic, tasteless, harmless to humans. It has great seepage force, high resistance to UV and efflorescence, and high stability of color tone. By artificial dyeing the concrete products with this type of dye, they can be more colorful and colorfast. The dyestuff can permeate 3~5mm through the surface to fuse with the concrete. And the problem of appearance caused by epoxy resin falling off can be avoided.
Features: high permeability: 3~8mm; colorfast High resistance to weather and UV; colorfast Bright and uniform color after dyeing High resistance to water, abrasion, and oxidation Various colors: basic colors like red, yellow, blue, green, black (grey) and other mixed colors
Application All kinds of plants: Power plants, chemical plants, warehouse, food and beverage plants, electronic factories, sewage treatment plants, pharmaceutical factories, cold storage, cotton mill, etc. Common land: Square, municipal construction, pavement, corridor, kitchen, libraries, museums, rest area, lobby, public toilets, etc. Transportation land: Terminals, ports, airports, parking lot, hangar CS shops, vehicle repair center, logistics center Trade estate: Commercial buildings, restaurants, bars, organic food stores, supermarkets, shopping malls, sports fitness center, pet stores, amusement parks, etc. Others: hospitals, schools, scientific research institutes
Instructions on how to use Concrete Grade Level Dyestuff Rough grinding: grind the dye to 200~400mesh using renovating or resin polishing pads Dyeing: firstly brush the product evenly on the surface, then brush it twice after it is dry out in order that it can be kept wet for 2~3 hours Solidification: brush with curing agent when the surface is dry out, and grind it after 12 hours Polishing: According to the temperature, start polishing using 800mesh, 1500mesh, 3000mesh resin polishing pads respectively after at least 8-hour reaction.(vacuum cleaner should be equipped when it is 800~3000mesh) After 3000mesh polishing, the surface appears high light effect.(sometimes the color seem uneven or be fading, it will be effective to brush protective agent. Protective agent: brush protective agent again at last (so that there appears bright and even color). People and vehicles are allowed to step on the ground after one day's permeation. Thus, the effect of water and oil resistance is achieved.
The following procedure is to achieve good glossiness:
Fine grinding: When the surface is dry out after brushing curing agent, grind it alternately from 800mesh to 1000mesh, using soft resin polishing pads. Then make use of the polishing machine with white pads on it (revolving speed 2500RPM) to polish it.