DH-BP-01 Medical Face Mask Synthetic Blood Penetration Resistance Tester
Description
Spray a certain amount of synthetic blood at a certain pressure and distance in the horizontal direction toward one side of the mask to be tested, and observe the penetration of synthetic blood on the other side of the mask.
Technical Index
Convenient mask clamping device |
The pressure of the injection device is adjustable |
Synthetic blood sampling device |
Spray distance |
300mm ~ 305mm adjustable |
Nozzle diameter |
0.84mm |
Spray pressure |
10.7kPa (80 mmHg), 16 kPa (120 mmHg), 21.3 kPa (160 mmHg) |
Jet speed |
450cm / s, 550cm / s, 635cm / s |
Applicable Standards
GB 19083-2010 Technical requirements for medical protective masks
YY/T 0691 2008 Infectious pathogen protective equipment, medical masks, synthetic blood penetration resistance test method (fixed volume, horizontal injection)
YY 0469-2011 Technical requirements for medical surgical masks, blood penetration test device
Maintenance
1. When carrying, please do not carry from the bottom of the control box to avoid being crushed.
2. Wipe the electroplated parts with engine oil to prevent rust and keep it bright.
3. After the test, please wipe the machine clean, and regularly apply oil on each movable fulcrum to increase its service life and sensitivity.
(The lubricating oil is mixed with butter and a little engine oil)
4. Please wipe the panel (control box or display) with a dry cloth to prevent water from being damaged, so as not to damage the IC electronic parts.
5. Please fix all the jigs and fittings, and wipe the anti-rust oil to prevent rust.
6. After the machine is moved and placed, the foundation and level must be fixed steadily and stable.
7. Please input power according to the label. (Note that the phase of the input power supply must be correct, otherwise leakage will occur)
8. Please execute the grounding output according to the specification to avoid the risk of leakage and signal interference.
9. Do not pull out the plug during work.
10. Please operate and maintain by professionals. In case of major problems, please inform our company's maintenance department to dispatch personnel to deal with.Do not disassemble parts privately to avoid major losses.
Packaging & Shipping
Company Information
We,
Dongguan Hongtuo Instrument Co., Ltd, a China based company, are pleased to introduce ourselves as a notable testing equipments and machines manufacturer.Our company was established in the year 2000 with two primarily motto, which includes complete client satisfaction and to reach top-most position in the international market. The exceptional quality of our products like
Gold Tester,Gold Testing Machine,Density Meter,Universal Tensile Testing Machine,Climatic Chamber,Melt Flow Index Tester,Charpy Impact Testing Machine,Tap Density Tester,Abrasion Tester,Ultrasonic Flaw Detector,Surface Roughness Tester and other Laboratory Testing Equipment, etc. is our company's USP.
Certification