Business Type: Trading Company
Jinan, Shandong, China
DC 12/24V Air Cooled Small Mini Condensing Unit For Car Cabinet
From 1/3HP to 1.5HP, R404a,R134a,MLBP. galvanized steel casing,black paint.Open type, side blowing. opitional parts&fans.Special voltage for 60HZ Voltage countries.Used for cold room and refrigeration industry.European quality and reasonable price.
1. Compressor technical performance
Product Model ZH25DC
Working volume, CM 3 2.5
Application Type LBP
Speed, rpm 2000 2500 3000 3500
Cooling capacity, W 42 52 61 71
Input power, W 35 43 50 59
Operating current, A 2.9 3.7 4.1 4.9
Performance Coefficient C.O.P, W/W 1.2
Operating voltage, VDC 10.9 to 17V, 22.7 to 31.5V
Cooling method ST or FC
Weight of the compressor, kg 3.2
Controller weight, kg 0.4
Throttling method Capillary
Power Supply, VDC 12/24
Test conditions: Evaporation temperature -23.3°C Inspiratory temperature 32.2°C
Condensing temperature 54.4°C Supercooling temperature 32.2°C
Ambient temperature 32.2°C Test voltage 12VDC
Note: The current at the 24VDC input is 1/2 of the value in the above table
The brushless DC motor is used in this compressor. When using the controller, the controller must be properly connected to the compressor.
The chart is as
112/24V DC power supply
3 power switch
4 fault indicator
512V cooling fan
6 temperature control switch
7 speed resistance
8 power protection resistor
3, compressor accessories
1) Controller 1pcs
2) Controller Locking Screws 1pcs
3) Earthquake mat 4pcs
4, transportation and storage considerations
1) During the transportation of the compressor, the compressor should be kept in a vertical state and must not be inverted. Large shocks should be avoided at the same time.
Movement and impact
2) The compressor should be stored in a dry and ventilated place to prevent it from getting wet.
If you are interested in our compressor, pls give us your detailed specification.For more informaiton, pls feel free to contact us. We will reply you immediately.
As a professional manufacturer of refrigeration parts in China, we can make different design products according to customer's requirement. Our main products are refrigeration Evaporator, sub zero freezer condenser,roll bond evaporator, Copper filter drier and so on.We are the best price, best quality for your service, we look forward to working with you for your cooperation.
Shock absorber, oil separator, gas liquid separator
If you need any further information, please feel free to contact us.
We offer customize service, OEM welcomed!
The small condensing unit are suitable for freezers and other cooling appliances, used for car, cold storage, etc.
The main feature: small volume, light weight, small vibration, high efficiency, low noise and good reliability.
We are the more than 10 Year professional factory for refrigeration parts and air condiioner parts. We always supply the goods to
USA, AUSTRALIA, BRAZIL, RUSSIA, PAKISTAN, KOREA, ITALY, SPAIN, SINGAPORE, NIGERIA, INDONESIA, BANGLADESH, CHILE, ARGENTINA, VENEZUELA ,INDIA......
If you are interested in our compressor, pls give us your detailed specification.
For more informaiton, pls feel free to contact us. We will reply you immediately!