Plastic and steel elevator bucket
D Elevator Bucket
In most cases, buckets stopped in use are caused by the heavy abrasion or impact on the bucket lip or tearing the bolt fitting due to collision in the running.
Our D bucket design will relieve such damage in use and extend the life of the bucket.
The unique design has made an appropriate thickness reduction on the bottom which requires a lower intensity, and the saved raw material will be used to increase the thickness of the bucket lip and the area around bolt holes. In this way, the buckets has higher intensity and can become more wear-resistant without increasing the total weight.
Materials:
HDPE, Nylon, PU
Usage:
1. Suitable for high-speed centrifugal discharge.
2. Recommended minimum bucket spacing: Width of the bucket projection "B"+25mm, which can be appropriately reduced according to elevator capacity requirement.
3. Recommended elevator velocity ≤ 2.5m/ s.
4. Recommend using"Z-Y+10%" as usable capacity for engineering purpose.
Model
A(mm)
B(mm)
C(mm)
D(mm
/in)
E(mm/in)
Qty of holes
Hole Dia. (mm)
Capacity(L)
(X-Y)
Capacity(L)
(Z-Y)+10%
Capacity(L)
(Z-Y)
D4× 3
107
81
75
22
50
2
7
0.32
0.28
0.25
D5× 4
133
113
106
32
60
2
7
0.85
0.65
0.59
D6× 4
159
108
103
32
90
2
7
0.87
0.72
0.65
D7× 4
184
108
103
32
120
2
9
1.04
0.83
0.75
D6× 5
168
140
130
40
90
2
9
1.48
1.21
1.10
D7× 5
192
140
130
40
120
2
9
1.73
1.32
1.20
D8× 5
211
140
130
40
120
2
9
1.92
1.55
1.41
D9× 5
237
140
130
40
85
3
9
2.41
1.93
1.75
D11× 5
289
140
130
45
100
3
9
2.75
2.21
2.01
D8× 6
211
168
154
45
120
2
9
2.83
2.28
2.08
D9× 6
237
168
154
40
85
3
9
3.23
2.57
2.34
D10× 6
266
168
154
45
90
3
9
3.62
2.84
2.58
D11× 6
287
168
154
45
100
3
9
4.01
3.11
2.83
D12X6
313
168
154
45
85
4
9
4.44
3.48
3.16
D13X6
338
168
154
45
85
4
9
4.74
3.78
3.44
D14X6
368
168
154
50
95
4
9
5.08
4.15
3.77
D9× 6-1/2
230
180
180
45
75
3
9
3.67
2.78
2.53
D11× 6-1/2
280
180
180
45
100
3
9
4.62
3.52
3.20
D10X7
269
197
180
50
90
3
9
4.83
4.07
3.70
D11× 7
287
197
180
45
100
3
9
5.39
4.35
3.95
D12× 7
326
197
180
45
85
4
9
5.81
4.79
4.35
D13× 7
343
197
180
45
90
4
9
6.52
5.58
5.07
D14× 7
373
197
180
50
95
4
9
6.90
5.74
5.22
D15× 7
392
197
180
50
100
4
9
7.61
6.68
6.07
D16× 7
427
197
180
48
85
5
9
7.94
6.95
6.32
D11× 8
280
220
216
55
65
4
9
6.52
5.40
4.91
D12× 8
331
222
206
55
85
4
9
7.45
6.35
5.77
D12× 8-1/2
330
220
216
55
85
4
9
7.88
6.55
5.95
D14× 8
378
222
206
55
95
4
9
8.76
7.56
6.87
D14× 8-1/2
380
220
216
55
75
5
9
9.24
7.69
6.99
D15× 8
392
222
206
55
80
5
9
9.47
8.73
7.94
D16× 8
434
222
206
55
85
5
9
10.38
8.91
8.10
D18× 8
473
222
206
55
95
5
9
11.50
9.98
9.07
D20× 8
520
225
210
55
90
6
9
13.11
11.66
10.60
D16× 9
430
260
260
65
68
6
11
14.57
12.10
11.00
D1109
116
92
85
25
60
2
7
0.42
0.30
0.27
D1411
145
110
96
35
60
2
7
0.75
0.71
0.65
D1311
134
115
94
35
60
2
7
0.75
0.56
0.51
D1814
188
140
130
40
120
2
9
1.70
1.49
1.35
D2314
235
140
130
40
85
3
9
2.27
1.60
1.45
D2814
280
140
139
40
100
3
9
2.70
1.87
1.70
D2816
282
168
154
45
90
3
9
3.70
3.01
2.74
Our bucket workshop:
The plastic bucket type we made(Send us inquiry for detailes model no.):