Customized 150L Liquid Dispensing Tank Water Tank Stainless Steel Cold Hot Water Dispenser Part Liquid Storage Tank

Tank Optional Configuration

The body of stainelss steel sanitary reactor can chose sterile air filter, thermometer(Digital display or Dial type), PH meter, pressure gauge, steam sterilization hole, sight glasses, sanitary manhole, liquid in-outlet, CIP Universal rotating cleaning ball, liquidometer and Liquid level control system(Bearing module, non-contact ultrasonic, static pressure transmitting device) and so on, also can configure as customers' requirement.

Application

• Apply to oil, chemical, rubber, pesticide, dye, medicine and food, to complete the sulfide, hydrogenated, alkylation, polymerization, condensation process
 

Feature

• Volume: 600L~20000L and multiple specification, also can design and manufacture according to customers' requirement.

• Jacket can pass steam (or hot water), can also pass the cooling water. Jacket has disk tubular, full jacketed and Maitreya plate. Jacketed outside covered with insulation, thermal insulation material for rock wool (warm) or PU (cold).

• The connection adopts Tri-clamp, the tanks' inner use 304 or 316L. The inner surface mirror polishing Ra≤0.28μm~0.6μm, outer surface can polishing, wire drawing and sandblasting according to customers' requirement.

• Agitation adopts top or side mechanical agitation. Stirring methods(Push type, anchor, etc) can be selected. The best RPM is about 200r/min(push type) or 60r/min(anchor type).

• The sealing of agitating roller adopts sanitary mechanical seal. The mixing motor can use Cycloidal reducer, stepless speed reducer. These items can be selected according to customers' requirement. (Frequency control is widely used)