-
Watching this video willVideo unavailable.
consume data if you are not using WI-FI
Please check your network. 
Custom Machine/Motor/Spherical/Cylindrical/Tapered/Taper Roller Bearing/Angular/Insert/Thrust/Linear/Pillow Block/Guide Rail/Ball Screw/Deep Groove/Ball Bearing
Purchase Qty. / FOB Price:
Get Latest Price
US$ 10
1-99 Piece
US$ 0.6
≥100 Pieces
500, 0000/Month
Quick Details
View All
standard, non-standard
Unseparated
Radial Bearing
Non-Aligning Bearings
Bearing Steel
Medium and Large(120-190mm)
Nanjing JPG Bearing & Equipment Co., Ltd.
Business Type: Manufacturer/Factory
Nanjing, Jiangsu, China
Product Details
Quick Details
Custom Machine/Motor/Spherical/Cylindrical/Tapered/Taper Roller Bearing/Angular/Insert/Thrust/Linear/Pillow Block/Guide Rail/Ball Screw/Deep Groove/Ball Bearing
standard, non-standard
Unseparated
Radial Bearing
Non-Aligning Bearings
Bearing Steel
Medium and Large(120-190mm)
Double
Roller Bearings
as Customized
Best
as Needed
15mm-4000mm
JPG or OEM or neutral marking or no marking
as Customer's Request
depends on order
Jiangsu Nanjing
84821020
Product Details
Except for standard size bearings,
The outer diameter, inner diameter and width of the bearing can be customized according to your needs.
General specifications are as follows:
Content is limited, more bearing parameters, please contact us.
use
The precision of the bearing is more careful than the general mechanical parts to install and debug.
1) keep the bearings and their surrounding environment clean, and try to install them in closed or semi-closed conditions;
2) use suitable tools and methods (heating) to install the bearing to avoid the brutal percussion, which will cause a strong impact on the bearing and destroy the internal channel;
3) keep the bearings well lubricated and use proper lubricant;
4) pay attention to bearing rust protection, avoid using in damp places, and wear gloves when installing and disassembling;
5) to formulate daily operation specifications for bearing;
6) in case of high temperature, high speed and other special conditions, please communicate with our company in advance, and we will make appropriate adjustments to the products to meet the requirements.
safekeeping
The bearings are coated with anti-rust oil and anti-rust paper in the factory. As long as the packaging is not damaged, the quality of the bearing will be guaranteed.
But long stored in humidity below 65%, the temperature is 20 ºC about conditions, the shelf in 30 cm above the ground is advisable.
In addition, the storage area should avoid direct sunlight or contact with the cold wall.Packaging:
1.Neutral Package:Plastic Bag + Carton + Pallet;
2.Commercial Package:Plastic Bag + Box + Carton + Pallet;
3.As the clients' requirement.
Delivery:
1.Less than 1000 pcs , we will send by express.( Door to Door, Convenient ),
Or by air transport.( Fastest and safest, but expensive )
2.More than 1000pcs , we will send by sea.( Cheapest, safe )
Payment:
1.Less than 1000 pcs , 100% T/T, Western Union in advance.
2.Between 1000-10000pcs, TT, Western Union, MoneyGram.
3.More than 10000pcs , TT, L/C ,Western Union, MoneyGram.
The outer diameter, inner diameter and width of the bearing can be customized according to your needs.
| 1. The inner circle and outer ring can be designed according to the requirements. 2. Bearing steel quality, also can provide stainless steel material as needed, using ceramic ball structure. 3. The order quantity reaches 5000 sets. The sealing ring can provide different colors. 4. The maintainer is the steel stamping storage rack, and the nylon cage can be changed as needed. 5. SHELL grease or other high-performance oils. |
General specifications are as follows:
| Basic | Nominal Bearing Dimensions | Preferred Shoulder Diameters | Basic | Effective | Limiting | Weight | |||||||
| Load Ratings | Center Load | Speeds | |||||||||||
| Bearing | d | D | T | B | C | r1 | r2 | ||||||
| No. | (Min Inner Ring) | (Min Out Ring) | Cr | Cor | a | Grease | Oil | (Approx.) | |||||
| mm | mm | mm | mm | mm | mm | mm | KN | KN | mm | rpm | rpm | kg | |
| 30203 | 17 | 40 | 13.25 | 12 | 11 | 1 | 1 | 20.91 | 21.92 | 9.9 | 9900 | 13000 | 0.078 |
| 30204 | 20 | 47 | 15.25 | 14 | 12 | 1 | 1 | 28.49 | 30.6 | 11.2 | 8800 | 12000 | 0.124 |
| 30205 | 25 | 52 | 16.25 | 15 | 13 | 1 | 1 | 32.67 | 36.97 | 12.5 | 7300 | 10000 | 0.151 |
| 30206 | 30 | 62 | 17.25 | 16 | 14 | 1 | 1 | 43.58 | 50.48 | 13.8 | 6300 | 8400 | 0.229 |
| 30207 | 35 | 72 | 18.25 | 17 | 15 | 1.5 | 1.5 | 54.28 | 63.47 | 15.3 | 5500 | 7400 | 0.328 |
| 30208 | 40 | 80 | 19.25 | 18 | 16 | 1.5 | 1.5 | 62.95 | 73.92 | 16.9 | 4900 | 6600 | 0.419 |
| 30209 | 45 | 85 | 20.75 | 19 | 16 | 1.5 | 1.5 | 67.84 | 83.58 | 18.6 | 4400 | 6000 | 0.474 |
| 30210 | 50 | 90 | 21.75 | 20 | 17 | 1.5 | 1.5 | 73.26 | 92.1 | 20 | 4000 | 5300 | 0.529 |
| 30211 | 55 | 100 | 22.75 | 21 | 18 | 2 | 1.5 | 90.51 | 113.7 | 21 | 3600 | 5000 | 0.74 |
| 30212 | 60 | 110 | 23.75 | 22 | 19 | 2 | 1.5 | 102.85 | 130.07 | 22 | 3400 | 4500 | 0.904 |
| 30213 | 65 | 120 | 24.75 | 23 | 20 | 2 | 1.5 | 118.81 | 152.69 | 23.5 | 3100 | 4200 | 1.18 |
| 30214 | 70 | 125 | 26.5 | 24 | 21 | 2 | 1.5 | 131.7 | 173.73 | 25.5 | 2900 | 4000 | 1.26 |
| 30215 | 75 | 130 | 27.5 | 25 | 22 | 2 | 1.5 | 138.06 | 185.45 | 27 | 2800 | 3800 | 1.41 |
| 30216 | 80 | 140 | 28.25 | 26 | 22 | 2.5 | 2 | 159.43 | 212.95 | 27.5 | 2600 | 3400 | 1.72 |
| 30217 | 85 | 150 | 30.5 | 28 | 24 | 2.5 | 2 | 176.34 | 236.95 | 30 | 2400 | 3200 | 2.14 |
| 30218 | 90 | 160 | 32.5 | 30 | 26 | 2.5 | 2 | 198.94 | 269.72 | 32 | 2200 | 3000 | 2.66 |
| 30219 | 95 | 170 | 34.5 | 32 | 27 | 3 | 2.5 | 255.76 | 309.23 | 34 | 2200 | 2800 | 3.07 |
| 30220 | 100 | 180 | 37 | 34 | 29 | 3 | 2.5 | 258 | 335 | 36 | 2000 | 2700 | 3.78 |
| 30221 | 105 | 190 | 39 | 36 | 30 | 3 | 2.5 | 287 | 380 | 38.1 | 1900 | 2500 | 4.51 |
| 30222 | 110 | 200 | 41 | 38 | 32 | 3 | 2.5 | 325 | 435 | 40.1 | 1800 | 2400 | 5.28 |
| 30224 | 120 | 215 | 43.5 | 40 | 34 | 3 | 2.5 | 345 | 470 | 44.4 | 1700 | 2200 | 6.28 |
| 30226 | 130 | 230 | 43.75 | 40 | 34 | 4 | 3 | 375 | 505 | 45.8 | 1500 | 2000 | 7.25 |
| 30228 | 140 | 250 | 45.75 | 42 | 36 | 4 | 3 | 390 | 515 | 48.9 | 1400 | 1900 | 8.74 |
| ☆We reserve the right to change specifications and other information included in this catalogue without notice. | |||||||||||||
| Basic | Nominal Bearing Dimensions | Preferred Shoulder Diameters | Basic | Effective | Limiting | Weight | |||||||
| Load Ratings | Center Load | Speeds | |||||||||||
| Bearing | d | D | T | B | C | r1 | r2 | ||||||
| No. | (Min Inner Ring) | (Min Out Ring) | Cr | Cor | a | Grease | Oil | (Approx.) | |||||
| mm | mm | mm | mm | mm | mm | mm | KN | KN | mm | rpm | rpm | kg | |
| 30302 | 15 | 42 | 14.25 | 13 | 11 | 1 | 1 | 23.2 | 21.6 | 9.6 | 9900 | 13000 | 0.094 |
| 30303 | 17 | 47 | 15.25 | 14 | 12 | 1 | 1 | 28.9 | 27.2 | 10.4 | 9000 | 12000 | 0.129 |
| 30304 | 20 | 52 | 16.25 | 15 | 13 | 1.5 | 1.5 | 35.5 | 34 | 11.1 | 8000 | 11000 | 0.165 |
| 30305 | 25 | 62 | 18.25 | 17 | 15 | 1.5 | 1.5 | 48.5 | 48.1 | 13 | 6700 | 8900 | 0.263 |
| 30306 | 30 | 72 | 20.75 | 19 | 16 | 1.5 | 1.5 | 60 | 63.1 | 15.3 | 5700 | 7600 | 0.387 |
| 30307 | 35 | 80 | 22.75 | 21 | 18 | 2 | 1.5 | 75.3 | 82.6 | 16.8 | 5000 | 6700 | 0.515 |
| 30308 | 40 | 90 | 25.25 | 23 | 20 | 2 | 1.5 | 91.5 | 107.6 | 19.5 | 4400 | 5900 | 0.747 |
| 30309 | 45 | 100 | 27.25 | 25 | 22 | 2 | 1.5 | 111 | 129.8 | 21.3 | 4000 | 5300 | 0.984 |
| 30310 | 50 | 110 | 29.25 | 27 | 23 | 2.5 | 2 | 133 | 152 | 23 | 3600 | 4800 | 1.31 |
| 30311 | 55 | 120 | 31.5 | 29 | 25 | 2.5 | 2 | 155 | 179 | 24.5 | 3300 | 4400 | 1.66 |
| 30312 | 60 | 130 | 33.5 | 31 | 26 | 3 | 2.5 | 183 | 214 | 26.5 | 3000 | 4000 | 2.06 |
| 30313 | 65 | 140 | 36 | 33 | 28 | 3 | 2.5 | 203 | 238 | 28.5 | 2800 | 3700 | 2.55 |
| 30314 | 70 | 150 | 38 | 35 | 30 | 3 | 2.5 | 230 | 272 | 30 | 2600 | 3500 | 3.06 |
| 30315 | 75 | 160 | 40 | 37 | 30 | 3 | 2.5 | 255 | 305 | 32 | 2400 | 3200 | 3.57 |
| 30316 | 80 | 170 | 42.5 | 39 | 33 | 3 | 2.5 | 297 | 350 | 34 | 2300 | 3000 | 4.41 |
| 30317 | 85 | 180 | 44.5 | 41 | 34 | 4 | 3 | 305 | 365 | 35.5 | 2100 | 2900 | 5.2 |
| 30318 | 90 | 190 | 46.5 | 43 | 36 | 4 | 3 | 270 | 320 | 37.5 | 1940 | 2640 | 6.03 |
| 30319 | 95 | 200 | 49.5 | 45 | 38 | 4 | 3 | 296 | 355 | 40 | 1900 | 2530 | 6.98 |
| 30320 | 100 | 215 | 51.5 | 47 | 39 | 4 | 3 | 365 | 445 | 41.5 | 1800 | 2400 | 8.56 |
| 30321 | 105 | 225 | 53.5 | 49 | 41 | 4 | 3 | 455 | 565 | 43.2 | 1700 | 2300 | 9.52 |
| 30322 | 110 | 240 | 54.5 | 50 | 42 | 4 | 3 | 485 | 595 | 45.1 | 1600 | 2200 | 11 |
| 30324 | 120 | 260 | 59.5 | 55 | 46 | 4 | 3 | 535 | 655 | 50 | 1500 | 2000 | 13.9 |
| ☆We reserve the right to change specifications and other information included in this catalogue without notice. | |||||||||||||
| Basic | Nominal Bearing Dimensions | Preferred Shoulder Diameters | Basic | Effective | Limiting | Weight | |||||||
| Load Ratings | Center Load | Speeds | |||||||||||
| Bearing | d | D | T | B | C | r1 | r2 | ||||||
| No. | (Min Inner Ring) | (Min Out Ring) | Cr | Cor | a | Grease | Oil | (Approx.) | |||||
| mm | mm | mm | mm | mm | mm | mm | KN | KN | mm | rpm | rpm | kg | |
| 32004 | 20 | 42 | 15 | 15 | 12 | 0.6 | 0.6 | 24.9 | 27.9 | 10.5 | 9500 | 13000 | 0.097 |
| 32005 | 25 | 47 | 15 | 15 | 11.5 | 0.6 | 0.6 | 27.8 | 33.5 | 12 | 8000 | 11000 | 0.114 |
| 32006 | 30 | 55 | 17 | 17 | 13 | 1 | 1 | 37.5 | 46.5 | 13.5 | 6900 | 9200 | 0.166 |
| 32007 | 35 | 62 | 18 | 18 | 14 | 1 | 1 | 41.5 | 52.5 | 15.5 | 6100 | 8100 | 0.224 |
| 32008 | 40 | 68 | 19 | 19 | 14.5 | 1 | 1 | 50 | 65.5 | 15 | 5300 | 7100 | 0.273 |
| 32009 | 45 | 75 | 20 | 20 | 15.5 | 1 | 1 | 57.5 | 76.5 | 16.5 | 4800 | 6400 | 0.346 |
| 32010 | 50 | 80 | 20 | 20 | 15.5 | 1 | 1 | 62.5 | 88 | 17.5 | 4400 | 6000 | 0.366 |
| 32011 | 55 | 90 | 23 | 23 | 17.5 | 1.5 | 1.5 | 80.5 | 118 | 20 | 4000 | 5400 | 0.563 |
| 32012 | 60 | 95 | 23 | 23 | 17.5 | 1.5 | 1.5 | 82 | 123 | 21 | 3700 | 5000 | 0.576 |
| 32013 | 65 | 100 | 23 | 23 | 17.5 | 1.5 | 1.5 | 83 | 128 | 22.5 | 3400 | 4600 | 0.63 |
| 32014 | 70 | 110 | 25 | 25 | 19 | 1.5 | 1.5 | 105 | 160 | 24 | 3200 | 4300 | 0.848 |
| 32015 | 75 | 115 | 25 | 25 | 19 | 1.5 | 1.5 | 106 | 167 | 25.5 | 3000 | 4000 | 0.909 |
| 32016 | 80 | 125 | 29 | 29 | 22 | 1.5 | 1.5 | 139 | 216 | 27 | 2800 | 3700 | 1.28 |
| 32017 | 85 | 130 | 29 | 29 | 22 | 1.5 | 1.5 | 142 | 224 | 28.5 | 2600 | 3600 | 1.35 |
| 32018 | 90 | 140 | 32 | 32 | 24 | 2 | 1.5 | 168 | 270 | 30 | 2500 | 3300 | 1.79 |
| 32019 | 95 | 145 | 32 | 32 | 24 | 2 | 1.5 | 171 | 280 | 31.5 | 2400 | 3200 | 1.83 |
| 32020 | 100 | 150 | 32 | 32 | 24 | 2 | 1.5 | 170 | 281 | 32.5 | 2200 | 3000 | 1.91 |
| 32021 | 105 | 160 | 35 | 35 | 26 | 2.5 | 2 | 204 | 340 | 34.3 | 2100 | 2800 | 2.48 |
| 32022 | 110 | 170 | 38 | 38 | 29 | 2.5 | 2 | 236 | 390 | 35.9 | 2000 | 2700 | 3.09 |
| 32024 | 120 | 180 | 38 | 38 | 29 | 2.5 | 2 | 245 | 420 | 39.7 | 1800 | 2500 | 3.27 |
| 32026 | 130 | 200 | 45 | 45 | 34 | 2.5 | 2 | 320 | 545 | 43.9 | 1700 | 2200 | 5.06 |
| 32028 | 140 | 210 | 45 | 45 | 34 | 2.5 | 2 | 330 | 580 | 46.6 | 1600 | 2100 | 5.32 |
| 32030 | 150 | 225 | 48 | 48 | 36 | 3 | 2.5 | 375 | 655 | 49.8 | 1400 | 2000 | 6.6 |
| 32032 | 160 | 240 | 51 | 51 | 38 | 3 | 2.5 | 435 | 790 | 53 | 1400 | 1800 | 7.93 |
| 32034 | 170 | 260 | 57 | 57 | 43 | 3 | 2.5 | 505 | 895 | 56.6 | 1300 | 1700 | 10.6 |
| ☆We reserve the right to change specifications and other information included in this catalogue without notice. | |||||||||||||
| Basic | Nominal Bearing Dimensions | Preferred Shoulder Diameters | Basic | Effective | Limiting | Weight | |||||||
| Load Ratings | Center Load | Speeds | |||||||||||
| Bearing | d | D | T | B | C | r1 | r2 | ||||||
| No. | (Min Inner Ring) | (Min Out Ring) | Cr | Cor | a | Grease | Oil | (Approx.) | |||||
| mm | mm | mm | mm | mm | mm | mm | KN | KN | mm | rpm | rpm | kg | |
| 32203 | 17 | 40 | 17.25 | 16 | 14 | 1 | 1 | 27.3 | 28.3 | 11.5 | 9900 | 13200 | 0.102 |
| 32204 | 20 | 47 | 19.25 | 18 | 15 | 1 | 1 | 36.5 | 39.5 | 12.5 | 8800 | 12000 | 0.16 |
| 32205 | 25 | 52 | 19.25 | 18 | 16 | 1 | 1 | 42 | 47 | 14 | 7300 | 9810 | 0.187 |
| 32206 | 30 | 62 | 21.25 | 20 | 17 | 1 | 1 | 54.5 | 64 | 15.5 | 6300 | 8400 | 0.301 |
| 32207 | 35 | 72 | 24.25 | 23 | 19 | 1.5 | 1.5 | 72.5 | 87 | 17.5 | 5500 | 7400 | 0.457 |
| 32208 | 40 | 80 | 24.75 | 23 | 19 | 1.5 | 1.5 | 79.5 | 93.5 | 19 | 4900 | 6600 | 0.558 |
| 32209 | 45 | 85 | 24.75 | 23 | 19 | 1.5 | 1.5 | 82 | 100 | 20 | 4400 | 6000 | 0.607 |
| 32210 | 50 | 90 | 24.75 | 23 | 19 | 1.5 | 1.5 | 87.5 | 109 | 21 | 4000 | 5300 | 0.648 |
| 32211 | 55 | 100 | 26.75 | 25 | 21 | 2 | 1.5 | 108 | 134 | 22.5 | 3600 | 5000 | 0.876 |
| 32212 | 60 | 110 | 29.75 | 28 | 24 | 2 | 1.5 | 130 | 164 | 25 | 3400 | 4500 | 1.18 |
| 32213 | 65 | 120 | 32.75 | 31 | 27 | 2 | 1.5 | 159 | 206 | 27 | 3100 | 4200 | 1.58 |
| 32214 | 70 | 125 | 33.25 | 31 | 27 | 2 | 1.5 | 166 | 220 | 28.5 | 2900 | 4000 | 1.68 |
| 32215 | 75 | 130 | 33.25 | 31 | 27 | 2 | 1.5 | 168 | 224 | 30 | 2800 | 3800 | 1.74 |
| 32216 | 80 | 140 | 35.25 | 33 | 28 | 2.5 | 2 | 199 | 265 | 31 | 2600 | 3400 | 2.18 |
| 32217 | 85 | 150 | 38.5 | 36 | 30 | 2.5 | 2 | 224 | 300 | 33.5 | 2400 | 3200 | 2.75 |
| 32218 | 90 | 160 | 42.5 | 40 | 34 | 2.5 | 2 | 262 | 360 | 36 | 2200 | 3000 | 3.49 |
| 32219 | 95 | 170 | 45.5 | 43 | 37 | 3 | 2.5 | 299 | 415 | 39 | 2200 | 2800 | 4.3 |
| 32220 | 100 | 180 | 49 | 46 | 39 | 3 | 2.5 | 330 | 465 | 41.5 | 2000 | 2700 | 5.12 |
| 32221 | 105 | 190 | 53 | 50 | 43 | 3 | 2.5 | 380 | 540 | 44.8 | 1900 | 2500 | 6.25 |
| 32222 | 110 | 200 | 56 | 53 | 46 | 3 | 2.5 | 420 | 605 | 47.2 | 1800 | 2400 | 7.35 |
| 32224 | 120 | 215 | 61.5 | 58 | 50 | 3 | 2.5 | 460 | 680 | 52 | 1700 | 2200 | 9 |
| 32226 | 130 | 230 | 67.75 | 64 | 54 | 4 | 3 | 530 | 815 | 56.9 | 1500 | 2000 | 11.3 |
| 32228 | 140 | 250 | 71.75 | 68 | 58 | 4 | 3 | 610 | 920 | 60.5 | 1400 | 1900 | 14.3 |
| ☆We reserve the right to change specifications and other information included in this catalogue without notice. | |||||||||||||
| Bearing model | Bore(mm) | O.D(mm) | Width(mm) | Chamfer | Load Rating(KN) | Maximum speed(rpm) | Weight(Kg) | ||
| Dynamic | Static | Grease | Oil | ||||||
| 604 | 4 | 12 | 4 | 0.2 | 0.97 | 0.36 | 47000 | 55000 | 0.004 |
| 605 | 5 | 14 | 5 | 0.2 | 1.33 | 0.51 | 41000 | 51000 | 0.0035 |
| 606 | 6 | 17 | 6 | 0.3 | 2.19 | 0.87 | 38000 | 45000 | 0.007 |
| 607 | 7 | 19 | 6 | 0.3 | 2.34 | 0.95 | 35000 | 42000 | 0.007 |
| 608 | 8 | 22 | 7 | 0.3 | 3.45 | 1.4 | 32000 | 38000 | 0.0115 |
| 609 | 9 | 24 | 7 | 0.3 | 3.9 | 1.66 | 31000 | 37000 | 0.0147 |
| 6000 | 10 | 26 | 8 | 0.3 | 4.75 | 1.96 | 30000 | 36000 | 0.019 |
| 6001 | 12 | 28 | 8 | 0.3 | 5.4 | 2.36 | 29000 | 33000 | 0.0206 |
| 6002 | 15 | 32 | 9 | 0.3 | 5.85 | 2.85 | 25000 | 29000 | 0.03 |
| 6003 | 17 | 35 | 10 | 0.3 | 6 | 3.24 | 23000 | 26000 | 0.039 |
| 6004 | 20 | 42 | 12 | 0.6 | 9.38 | 5.03 | 18000 | 21000 | 0.069 |
| 6005 | 25 | 47 | 12 | 0.6 | 10.07 | 5.85 | 16000 | 19000 | 0.08 |
| 6006 | 30 | 55 | 13 | 1 | 13.23 | 8.3 | 13000 | 15000 | 0.114 |
| 6007 | 35 | 62 | 14 | 1 | 15.98 | 10.28 | 12000 | 14000 | 0.148 |
| 6008 | 40 | 68 | 15 | 1 | 16.78 | 11.54 | 10000 | 12000 | 0.189 |
| 6009 | 45 | 75 | 16 | 1 | 19.89 | 13.99 | 9200 | 11000 | 0.236 |
| 6010 | 50 | 80 | 16 | 1 | 20.77 | 15.38 | 8400 | 9800 | 0.254 |
| 6011 | 55 | 90 | 18 | 1.1 | 26.85 | 19.57 | 7700 | 9000 | 0.366 |
| 6012 | 60 | 95 | 18 | 1.1 | 28.02 | 21.51 | 7100 | 8300 | 0.389 |
| 6013 | 65 | 100 | 18 | 1.1 | 32.04 | 24.92 | 6700 | 8000 | 0.44 |
| 6014 | 70 | 110 | 20 | 1.1 | 36.77 | 29.08 | 6300 | 7100 | 0.6 |
| 6015 | 75 | 115 | 20 | 1.1 | 38.24 | 31.79 | 5800 | 7000 | 0.64 |
| 6016 | 80 | 125 | 22 | 1.1 | 42.33 | 35.64 | 5500 | 6500 | 0.854 |
| 6017 | 85 | 130 | 22 | 1.1 | 52.8 | 44.49 | 5300 | 6300 | 0.89 |
| 6018 | 90 | 140 | 24 | 1.5 | 52.34 | 45.08 | 5000 | 6000 | 1.02 |
| 6019 | 95 | 145 | 24 | 1.5 | 63.7 | 54 | 4700 | 5500 | 1.08 |
| 6020 | 100 | 150 | 24 | 1.5 | 63.7 | 54 | 4500 | 5500 | 1.15 |
| 6021 | 105 | 160 | 26 | 2 | 76.1 | 65.5 | 4200 | 5000 | 1.59 |
| 6022 | 110 | 170 | 28 | 2 | 85.2 | 73.5 | 4000 | 4700 | 1.96 |
| 6024 | 120 | 180 | 28 | 2 | 88.4 | 80 | 3800 | 4500 | 2.07 |
| 6026 | 130 | 200 | 33 | 2 | 112 | 101 | 3200 | 3800 | 3.16 |
| ☆We reserve the right to change specifications and other information included in this catalogue without notice. | |||||||||
| Bearing model | Bore(mm) | O.D(mm) | Width(mm) | Chamfer | Load Rating(KN) | Maximum speed(rpm) | Weight(Kg) | ||
| Dynamic | Static | Grease | Oil | ||||||
| 624 | 4 | 13 | 5 | 0.2 | 1.31 | 0.49 | 42000 | 50000 | 0.0048 |
| 625 | 5 | 13 | 5 | 0.3 | 1.76 | 0.68 | 37000 | 44000 | 0.005 |
| 626 | 6 | 16 | 6 | 0.3 | 2.34 | 0.95 | 34000 | 41000 | 0.008 |
| 627 | 7 | 22 | 7 | 0.3 | 3.45 | 1.4 | 32000 | 37000 | 0.013 |
| 628 | 5 | 24 | 8 | 0.3 | 4 | 1.66 | 31000 | 36000 | 0.017 |
| 629 | 9 | 26 | 8 | 0.3 | 4.75 | 1.96 | 27000 | 32000 | 0.019 |
| 6200 | 10 | 30 | 9 | 0.6 | 5.4 | 2.39 | 25000 | 30000 | 0.03 |
| 6201 | 12 | 32 | 10 | 0.6 | 7.28 | 3.1 | 23000 | 28000 | 0.036 |
| 6201/1/2 | 12.7 | 32 | 10 | 0.6 | 7.28 | 3.1 | 23000 | 28000 | 0.036 |
| 6202 | 15 | 35 | 11 | 0.6 | 7.64 | 3.72 | 20000 | 25000 | 0.046 |
| 6202/5/8 | 15.875 | 35 | 11 | 0.6 | 7.64 | 3.72 | 20000 | 25000 | 0.046 |
| 6202-16 | 16 | 35 | 11 | 0.6 | 7.64 | 3.72 | 20000 | 25000 | 0.046 |
| 6203 | 17 | 40 | 12 | 0.6 | 9.57 | 4.79 | 18000 | 22000 | 0.065 |
| 6203/5/8 | 15.875 | 40 | 12 | 0.6 | 9.57 | 4.79 | 18000 | 22000 | 0.065 |
| 6204 | 20 | 47 | 14 | 1 | 12.84 | 6.65 | 16000 | 18000 | 0.107 |
| 6205 | 25 | 52 | 15 | 1 | 14.02 | 7.88 | 13000 | 16000 | 0.125 |
| 6206 | 30 | 62 | 16 | 1 | 19.8 | 12.8 | 12000 | 14000 | 0.201 |
| 6207 | 35 | 72 | 17 | 1.1 | 27.06 | 15.33 | 10000 | 12000 | 0.287 |
| 6208 | 40 | 80 | 18 | 1.1 | 29.52 | 18.14 | 8800 | 10000 | 0.365 |
| 6209 | 45 | 85 | 19 | 1.1 | 29.36 | 19.19 | 7800 | 9200 | 0.42 |
| 6210 | 50 | 90 | 20 | 1.1 | 35.07 | 23.22 | 7100 | 8300 | 0.466 |
| 6211 | 55 | 100 | 21 | 1.5 | 39.07 | 26.54 | 6400 | 7600 | 0.606 |
| 6212 | 60 | 110 | 22 | 1.5 | 47.76 | 32.92 | 6000 | 7300 | 0.793 |
| 6213 | 65 | 120 | 23 | 1.5 | 57.19 | 40.15 | 5500 | 7000 | 0.99 |
| 6214 | 70 | 125 | 24 | 1.5 | 56.38 | 41.87 | 5100 | 6100 | 1.1 |
| 6215 | 75 | 130 | 25 | 1.5 | 60.68 | 45.47 | 4800 | 5600 | 1.2 |
| 6216 | 80 | 140 | 26 | 2 | 65.91 | 50.11 | 4500 | 5300 | 1.4 |
| 6217 | 85 | 150 | 28 | 2 | 87.1 | 64 | 4300 | 5000 | 1.79 |
| 6218 | 90 | 160 | 30 | 2 | 101 | 73.5 | 4000 | 4800 | 2.15 |
| 6219 | 95 | 170 | 32 | 2.1 | 114 | 73.5 | 3800 | 4500 | 2.62 |
| 6220 | 100 | 180 | 34 | 2.1 | 127 | 93 | 3600 | 4300 | 3.14 |
| 6221 | 105 | 190 | 36 | 2.1 | 146 | 105 | 3400 | 4000 | 3.7 |
| 6222 | 110 | 200 | 38 | 2.1 | 151 | 118 | 3200 | 3800 | 4.36 |
| ☆We reserve the right to change specifications and other information included in this catalogue without notice. | |||||||||
Content is limited, more bearing parameters, please contact us.
use
The precision of the bearing is more careful than the general mechanical parts to install and debug.
1) keep the bearings and their surrounding environment clean, and try to install them in closed or semi-closed conditions;
2) use suitable tools and methods (heating) to install the bearing to avoid the brutal percussion, which will cause a strong impact on the bearing and destroy the internal channel;
3) keep the bearings well lubricated and use proper lubricant;
4) pay attention to bearing rust protection, avoid using in damp places, and wear gloves when installing and disassembling;
5) to formulate daily operation specifications for bearing;
6) in case of high temperature, high speed and other special conditions, please communicate with our company in advance, and we will make appropriate adjustments to the products to meet the requirements.
safekeeping
The bearings are coated with anti-rust oil and anti-rust paper in the factory. As long as the packaging is not damaged, the quality of the bearing will be guaranteed.
But long stored in humidity below 65%, the temperature is 20 ºC about conditions, the shelf in 30 cm above the ground is advisable.
In addition, the storage area should avoid direct sunlight or contact with the cold wall.Packaging:
1.Neutral Package:Plastic Bag + Carton + Pallet;
2.Commercial Package:Plastic Bag + Box + Carton + Pallet;
3.As the clients' requirement.
Delivery:
1.Less than 1000 pcs , we will send by express.( Door to Door, Convenient ),
Or by air transport.( Fastest and safest, but expensive )
2.More than 1000pcs , we will send by sea.( Cheapest, safe )
Payment:
1.Less than 1000 pcs , 100% T/T, Western Union in advance.
2.Between 1000-10000pcs, TT, Western Union, MoneyGram.
3.More than 10000pcs , TT, L/C ,Western Union, MoneyGram.
View More
Recommended for You
Hot Searches
Roller Bearing
Contact Bearing
Bearing Wheel
Ball Roller Bearing
Rolling Bearing
Contact Ball Bearing
View More