Comaccord Hollow PP Round Holes Concrete Slab 18mm Plastic Formwork for Construction Site

The construction formwork materials produced by COMACCORD uses imported polypropylene resin as basic material, adding chemical additives toughening, flame resistance, weather resistance and anti-aging, smelt and form new construction material through chemical molecular structure reorganization.

1. Reuse more than 80 times

2. Waterproof, Anti slip,Bearable temperature:-10~90°C.

3. No expansion,no shrinkage,high strength.

4. No need oil,easily install and remove,only tapping, formwork can be fallen off.

5. Rinse with water will be clean.

6. Fire reisistance

7. Recycle, economical and environment-friendly

8. Low -cost

9-18 mm plastic construction formwork, three or two layers

Factory sale hollow building templates plastic construction concrete formwork

smooth surface, recycle use 50 times, can be nailed easily, no need release agent.

General Operation And Notes Of Instrument For used peri formwork :

• Method of use as well as wooden formwork,  plastic formwork reinforcement direction with batten direction placed in cross shaped.
• No need to smear the mold release agent before using formworks.
• When cast-in-place the flat plate, spacing between the keels should be 20 ~ 25 cm, and the spacing between the wall plate and keels hould be 10 ~ 20 cm.BEIZHU GROUP pp formwork no need releasing agent lightweight concrete panels best formwork as world.
• The seam-line between plastic formwork should be taped.
• The length of nail should not be too long, generally about 30 ~ 35 mm.
• The strength to drive nailsshould be moderate.
• When removing the formwork, please start from the small part of one end, the support and the plates should be removed at the same time aiming at preventing the template widespread drops, don't let the corner drop on the ground vertically.
• The plastic formwork accesses to be mixed used with wood veneer, bamboo veneer and other material plate.

Factory sale hollow building templates plastic construction concrete formwork

use pallet or loaded directly in the container

 1. Q: What's the main business of your company?

A: We are special exporter of plywood products, commercial plywood, film faced plywood, block board, MDF, OSB and acoustic panel.

2. Q: What's the payment term?

A: 1). 30% in advance, 70% paid against seeing copy of B/L.

    2). Irrevocable L/C At Sight. 

3. Q: CFR or CIF will be accepted?

A: With fulll position support from our own forwarder, we supply timely delivery and shipment.

4. Q: May I ask for exclusive agent right in my country?

A: We welcome you to be our longterm cooperator in this field. As we have strict principle to entitle the exclusive rights, we suggest placing trial orders first to test your market. If the response is really good, we can talk more on this point.

 

5. Q: Is OEM welcome by your company?

A: OEM is warmly welcome by our company.

Hope we both parties will benefit a lot through the cooperation.

6. Q: What's about the min-qty?

A:1*20GP.

7. Q: Big quantity and a long term can change the payment?

A: Sure.

8.What is your shipping port?
A:We ship the goods via Qingdao, Lianyungang port, or according the customers request.

9.How about the samples?
A:We could send you the samples via your express account, you can also prepay the postage to us. After the order confirmed, the express fee will be paid back. Pls kindly be assured of that. Thank you very much for your understanding in advance.