China Basketball Backstop
Major Specification
1. The column is welded with 180x180x4.0mm large rounded square pipe (R>40). The spherical arm is welded with 150x150x3mm square pipe. The rear tie rod is welded by 40x40x2.0mm square pipe. Basket fulcrum is formed by bending a circular pipe of 32x2.5mm on the bending machine once, which avoids the potential rust hazard caused by welding and welding slag. The plane and perpendicularity of the backboard can be adjusted by adjusting the pull rod.
2. Aluminum alloy edge toughened glass basketboard 1800*1050*10mm, with good safety, high transparency, anti-aging, corrosion resistance, not easy to blur and other characteristics, with good adhesive tape.
3. The basketball ring is made of_18 round steel. Under the basketball ring, there are arc piercing holes formed by stamping. The twelve segments are evenly distributed with appropriate clearance, and the basketball ring has good bending resistance.
4. If the baskets are installed directly, the dimension of the baskets is greater than or equal to 900mm; if the baskets are installed in advance, the buried parts are M18X900 buried hooks, the buried flanges are 7-hole flanges, and the side near the edge line of the site is two holes.
Audited Supplier 
){kind=link}
){kind=link}