| After-sales Service: | Technical Support, Maintenance Services |
|---|---|
| Condition: | New |
| Certification: | CCC, RoHS, CE |
| Warranty: | 24 Months |
| Automatic Grade: | Automatic |
| Installation: | Vertical |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Heller Industries Model 1936MK7 | ||
| Model | 1936MK7 (Air) | 1936MK7 (Nitrogen) |
| Electric Supply | ||
| Power Input (3 Phase) Standard | 480 volts | 480 volts |
| Breaker Size | 100 amps @ 480v | 100 amps @ 480v |
| kW | 9 - 15 Continuous | 9 - 15 Continuous |
| Typical Run Current | 25 - 35 amps @ 480v | 25 - 35 amps @ 480v |
| Optional Power Inputs Available | 208/240/380/400/415/440/480 VAC | 208/240/380/400/415/440/480 VAC |
| Frequency | 50/60 Hz | 50/60 Hz |
| Sequential Zone Turn On | S | S |
| Dimensions | ||
| Overall Oven Dimensions | 232" (590cm) L x 60" (152cm) W x 57" (144cm) H |
232" (590cm) L x 60" (152cm) W x 57" (144cm) H |
| Typical Net Weight | 4674 lbs. (2120 kg) | 5560 lbs. (2520 kg) |
| Typical Shipping Weight | 6064 lbs. (2740 kg) | 6928 lbs. (3140 kg) |
| Typical Shipping Dimension | 620 x 185 x 185 cm | 620 x 185 x 185 cm |
| Computer Control | ||
| AMD or Intel Based Computer | S | S |
| Flat Screen Monitor w/Mount | S | S |
| Windows Operating System | Windows 10 Home | Windows 10 Home |
| Auto Start Software | S | S |
| Data Logging | S | S |
| Password Protection | S | S |
| LAN Networking | O | O |
| Inert Atmosphere | ||
| Minimum PPM Oxygen | - | 10-25 PPM* |
| Waterless Cooling w/ Flux | ||
| Separation System | - | O |
| Nitrogen On/Off Valve | - | O |
| Oxygen Monitoring System | - | O |
| Nitrogen Standby System | - | O |
| Typical Nitrogen Consumption | - | 500 - 700 SCFH ** |
| Additional Features | ||
| KIC Profiling Software | S | S |
| Signal Light Tower | S | S |
| Powered Hood Lift | S | S |
| Five (5)Thermocouple Profiling | S | S |
| Redundant Alarm Sensors | O | O |
| Intelligent Exhaust System | O | O |
| KIC Profiler / ECD Profiler | O | O |
| Center Board Support | O | O |
| Board Drop Sensor | O | O |
| Board Counter | O | O |
| Bar Code Reader | O | O |
| Custom Paint & Decal | O | O |
| Battery Backup for Conveyor and PC | O | O |
| GEM/SECS Interfacing | O | O |
| Mesh Belt Conveyor | ||
| Height From Floor | 36.6" + 2.4" (93 cm + 6 cm) | 36.6" + 2.4" (93 cm + 6 cm) |
| Maximum PCB Width | 22" (56 cm) | 22" (56 cm) |
| Space Required Between PCB's | 0.0" (0.0 cm) | 0.0" (0.0 cm) |
| Conveyor Length On-Load | 18" (46 cm) * | 3" (7.5 cm) * |
| Conveyor Length Off-Load | 18" (46 cm) * | 3" (7.5 cm) * |
| Heated Tunnel Length | 140" (355 cm) | 140" (355 cm) |
| Process Clearance Above Mesh Belt | 2.3" (5.8 cm) | 2.3" (5.8 cm) |
| Mesh Belt Pitch | 0.5" (1.27 cm) | 0.5" (1.27 cm) |
| Maximum Conveyor Speed | 74"/Min (188 cm/min.) | 74"/Min (188 cm/min.) |
| Conveyor Direction Left to Right | S | S |
| Conveyor Direction Right to Left | O | O |
| Conveyor Speed Control | Closed Loop | Closed Loop |
| Edge Hold Conveyor System Option | ||
| Height from Floor - Standard | 37.8" ±2.4" (96 cm ± 6 cm) | 37.8" ±2.4" (96 cm ± 6 cm) |
| Height from Floor - Optional | 35.4" ± 2.4" (90 cm ± 6 cm) |
35.4" ± 2.4" (90 cm ± 6 cm) |
| Clearance Above & Below Conveyor Pins | 1.15" (2.9 cm) | 1.15" (2.9 cm) |
| Length of PCB Support Pins | .187" (4.75 mm) | .187" (4.75 mm) |
| 3 mm long support pins | O | O |
| Minimum/Maximum Board Width | 2" - 22" (5 - 56 cm) 24" (61cm) Optional** |
2" - 22" (5 - 56 cm) 24" (61cm) Optional** |
| Power Width Adjustment | S | S |
| Computer Controlled Width Adjust | O | O |
| Auto Lubrication System | S | S |
| Forced Convection Zones | ||
| Top & Bottom | 10 | 10 |
| Heater Type | Instant response open coil | Instant response open coil |
| Heater Material | Nichrome | Nichrome |
| Profile Change Time | 5 - 15 minutes | 5 - 15 minutes |
| Temperature Control | ||
| Accuracy of Temperature Controller | ± .1ºC | ± .1ºC |
| Cross-Belt Temperature Tolerance | ±3.0°C | ±3.0°C |
| Heater Wattage Per Zone | 5400 w*** | 5400 w*** |
| Temperature Range Standard | 60-350ºC | 60-350ºC |
| High Temperature Up to 450ºC | O | O |
| Cooling Systems | ||
| Number of Cooling Zones Standard | 3 | 3 |
| Cooling zone Length | 107cm | 115cm |
| Additional Cooling Zones | O | O |
| Water Cooling | - | O |
| Notes: | S = Standard, O = Optional. | |
------------FAQ----------------------------------------------------
Q: What we can do for you?
A: Total SMT Machines and Solution, professional Technical Support and Service.
Q:Are you a trade company or a manufacturer?
A: OEM & ODM service are available.
Q: What is your delivery date?
A: The delivery date is about 35 days after receipt of payment.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}