CNC Lathe Machine (T400/750&T460/750)
Over bed: 400/460mm
Maximum turned length: 750/1000/1500mm
Max. Swing in gap: 660/700mm
Spindle bore: 80mm
This machine has the following features:
Longitudinal and cross feeds are effected by ball leadscrews. Driven by servo motors.
Either vertical or horizontal 4-station or 6-station tool post or gang tools can be selected. The post is located on precision contrite gears with a high repeated positioning accuracy.
Both chuck and tailstock are supplied with hydraulic or manual type.
The surface of the bedways is supersonic frequency hardened and precision ground with a long service life.
The spindle bore size is Ø 80mm. The spindle system is high in the rigidity and accuracy.
| ITEMS |
T400/750 |
T460/750 |
| Over bed |
Ø400 mm |
Ø460 mm |
| Over carriage |
Ø210/Ø165 mm |
Ø250/Ø105 mm |
| (Gang tools) |
( Gang tools) |
| Maximum turned length |
750/1000 /1500 mm |
| Max. turning length |
620/870/1370 mm |
| *Max. swing in gap |
Ø660 mm |
Ø700 mm |
| *Effective length of gap |
300 mm |
| Spindle nose |
D8 |
| Spindle bore |
Ø80mm |
| Cone hole diameter and taper of spindle hole |
MT No.7 |
| Steps of spindle speed(Manual) |
12 |
| Range of spindle speed |
38~1680 r/min |
| Rapid feed for Axis Z |
10m/min |
| Rapid feed for Axis X |
8m/min |
| Max. travel of Axis Z |
710/960/1460 mm |
| Max. travel of Axis X |
250/330 ( Gang tool ) |
| Min. input |
0.001mm |
| Tool post stations |
4-ways or 6-ways or gang tools |
| Tool cross section |
25×25 mm |
| External diameter |
Ø75mm |
| Taper of bore |
MT No.4 |
| Max. Traverse |
95mm |
| X/Z motor torque |
4.7/7Nm |
| Power of main motor |
5.5KW(7.5KW) |
| Power of cooling pump |
75W |
| Overall dimensions(L×W×H) |
2060/2310/2790×1150×1450 mm |
| Net weight |
2250 \ 2450 \ 2950 |
| Note: The item with "*:" are only for 62 series |
Audited Supplier 
){kind=link}
){kind=link}