| Output Type: | Single |
|---|---|
| Warranty: | 2 Years |
| Output Power: | 1 - 50W |
| Input Voltage: | 85 ~ 264VAC 120 ~ 370VDC |
| Connection Mode: | Series Switching Power Supply |
| Starting Mode: | Self-excited Switching Power Supply |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| SPECIFICATIONS | |||
| OUTPUT | |||
| Model | MS-35-5 | MS-35-12 | MS-35-24 |
| DC Voltage | 5V | 12V | 24V |
| Rated Current | 7A | 3A | 1.4A |
| Current Range | 0-3A | 0-3A | 0-1.4A |
| Rated Power | 35W | 36W | 33.6W |
| Ripple & Noise | 50mVp-p | 50mVp-p | 100mVp-p |
| Voltage Adj. Range | +10,-5% | ±10% | ±10% |
| Voltage Tolerance | ±2% | ±1% | ±1% |
| Inlet Stability | ±0.5% | ±0.5% | ±0.5% |
| Load Stability | ±1% | ±0.5% | ±0.5% |
| Setup, Rise, Hold Up Time | 200s,100ms,30ms at full load | ||
| Voltage Range | 100~240VAC 47-63Hz; 240~370VDC | ||
| AC Current | 0.5A/115V 0.25A/230V | ||
| Efficiency | 65% | 68% | 72% |
| Inrush Current | Cold-start current 15A/115V 30A/230V | ||
| Leakage Current | <0.5mA/240VAC | ||
| Over Load | 105%~150% | ||
| Protection type: Fold back current limiting Reset: auto recovery | |||
| Working Temp., Humidity | -10ºC~+60ºC(Refer to output derating curve), 20%~90%RH | ||
| Storage Temp., Humidity | -20ºC~+85ºC,10%~95%RH | ||
| Temp. Coefficient | ±0.02%/ºC(0~50%) | ||
| Vibration | 10~500Hz,2G 10min,/1cycle,Period for 60min,each axes | ||
| Withstand Voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | ||
| Safety Standard | Meet UL1012 requirement(Not apply for the mark) | ||
| EMC Standard | Meet FCC PART15 J Conduction class B | ||
| Dimension | 85*58*38mm(L*W*H) | ||
| Weight | 0.4Kg | ||
| NOTE | |||
| 1.The testing condition for the parameter above is: 230VAC input, rated load, 25ºC 70% RH.Humidity. 2.Error.include the setting error,line stability and load stability. 3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. |
|||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}