Shanghai, Shanghai, China
Member Since: 2016
Business Type: Manufacturer/Factory,Trading Company
|Hot air welder|
|Temperature controll||We use photocell to controll temperature inside.|
|Temperature switch||Outside of the gun there is temperature switch.|
And once the plastic body is above 135 degree,the whole circuit will be cut off.
|Plastic material||At present,this plastic is one can resist the highest temperature.|
It can resist 280 degree.
|Bearing||We use high temperature bearing manufactured in Japan.|
|Ceramic heating element||We use Swedish heating wire for ceramic heating element inside the hot air gun.|
And ceramic material is also good quality.
It can resist high temperature 1650C.
|Voltage(V) :42 100 120 200 230 For 50/60Hz||Voltage(V) :200 230 For 50/60Hz||2.Main switch 3.Screw on the clamp|
|Power consumption(W) :960 1400 1600||Power consumption(W) :3400||4.Potentionmeter for temperature adjustment|
|Weight (kg) :1.3 with 3m cord||Weight (kg) :1.4 with 3m cord||5.Handle & Nozzle|
|Temerature :20-700 degrees Celsius,infinitely controlled||6.Air fillter|
|Air flow (1/min) :Max.230||7.Rubber stand|
|Air pressure (pa) :3000 (30mbar)after about 24 h operating time||8.Adapter tube|
|Size (mm):Customized||9.Heat protection tube|