Automatic Movable Hydraulic Mobile Electric Scissor Lifting Machine
1.Introduction of Product
Rock cotton rail picker use the electric drive, with the advantages of energy saving and environment protection. Electric lifting picker, adopt the hydraulic to achieve working platform lifting, and rely on electric to drive operation; The working platform can be lifted by remote control, in order to suitable for fruit harvesting of tall crops in greenhouse. The rail picker is highly automated and easy to use, which improves the operation efficiency.
2.Product Parameters
| Safe working load |
150Kg |
| Maximum platform height |
2800mm |
| Overall length |
2146mm |
| Overall width |
770mm |
| Overall height |
1691mm |
| Lifting Top Height |
6000mm |
| Table size |
1900X450mm |
| Lifting Motor |
24v/0.8Kw |
| Walking motor |
24V/0.4kw |
| Running speed |
2Km/h |
| Lifting/Sinking speed |
3-5m/min |
| Battery |
24V/50Ah |
| Charger |
24V/8A |
| Guide rail specification |
0.6m/φ50 |
| Total weight |
420Kg |
3.Product show
4. The frame is designed for welding of steel structure, and the scissor fork structure is welded with thick - walled seamless rectangular tubes, solid and reliable.The scissor fork connection using oil-free bearing with excessive coordination, lifting process without sloshing and noise.The working platform is made of non-skid aluminum plate, with compact structure, safe and stable operation.
The forward and backward running speed of this machine can be adjusted, The lifting system is driven by two single acting hydraulic cylinders and powered by a miniature hydraulic power source.This machine can be stopped at any position to facilitate operation at different heights.
When the rail picker moving forward or backward, the working platform can be lifted and lowered at the same time.
5.Maintenance
1).Hydraulic oil should be replaced after 8 months of product activation,Unscheduled replacement in the future depending on the number of uses and the degree of hydraulic oil contamination. When replacing the hydraulic oil, the inner wall of the fuel tank should be thoroughly cleaned, and foreign objects such as metal particles, cotton yarn, and fibers should not be allowed to enter the fuel tank.
2).The contamination of hydraulic oil must be strictly prevented, There shall be no other impurities such as water, acid or alkali in the oil, and no anti-rust oil shall be applied in the fuel tank.
3).If the solenoid valve is blocked due to foreign matter, the hydraulic system will malfunction,remove the electromagnet, unscrew the solenoid valve core with a long socket wrench, immerse it in kerosene and gently rotate the valve core to clean the stuck one. Foreign matter, gently pull out the valve core, check the exhibits and damage inside the valve sleeve, after handling, carefully install the valve core, so that the valve core can slide smoothly in the valve sleeve. Pay attention to maintain the original accuracy, and then put the valve together In the body, you can install the electromagnet.
4).If the operation platform falls automatically, check whether the emergency oil drain switch is loose, and if so, tighten it clockwise. If it is not, check whether the one-way valve seal is reliable, or check whether there is soft fiber in the oil that causes the one-way valve failure, use a socket wrench to screw the one-way valve out, if the seal is damaged, replace the seal, if there is a foreign body in the spool, clean the spool with diesel or kerosene, remove the foreign body and reassemble the spool and tighten it.
5).Non-professionals are not allowed to dismantle and repair oil pressure system parts at will. If you are not sure, do not self-repair, you can entrust our factory repairs.
6). he aerial work lifting platform should be kept clean. When not in use, should park in rainproof, prevent bask in, and ventilated and dry place
){kind=link}
){kind=link}