| Function Type: | Movement |
|---|---|
| Detection Type: | Movement |
| Output Signal Type: | Digital Type |
| Production Process: | Integration |
| Material: | Metal |
| IP Rating: | No |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier A microwave motion sensor uses electromagnetic radiation. It emits waves that are then reflected back to the receiver. The receiver analyzes the waves that are bounced back. If there is an object moving in the room,
these waves are going to be altered. The microwave detector is able to identify changes from moment to moment.
Ideally, the receiver should be receiving the same waves back again and again.
Because of the way that microwave motion sensors work, they can be either more sensitive or less sensitive.
They can identify every minute changes (a totally empty house) or be calibrated to require larger-scale movement (to avoid false positives).
|
voltage |
AC/DC12V~24V ±10% (50~60Hz) |
|
Power dissipation |
<2W (VA) |
|
Launch power |
<20 dBm EIRP |
|
Launch frequency density |
< 5mW/cm² |
|
Installation height |
3~4M |
|
Assemble a dip angle |
15°, 30°, 45°, 60° |
|
Detection mode |
Movement |
|
The maximum checks range |
4x2m (WxH)(while assembling 2.2 meters of altitude) |
|
Detection speed |
5cm/s (Along the longitudinal axis of air wire |
|
Dimensions |
115x73mm |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}