Suzhou, Jiangsu, China
Member Since: 2013
Business Type: Manufacturer/Factory,Trading Company
Advantage: European design with high cost performance.
Nice appearance with excellent process and finish.
High quality Fume hood with European standards.
Different and paticular interior structure
Paticular gear transmission
Exterior material: 1.2mm cold rolled steel plate coated with AkzoNobel epoxy resin powder
after welding,polishing, acid cleaning, phosphating etc. It includes 13 kinds of chemical treatment
processes. Coating thickness can reach 80um for fume hood.
Lining material and guidance flow panel: 5mm compact solid panel which is chemical resistant
and temperature resistant. Corrosive material is used to connect inside lining panel and guidance
flow panel.Fixed parts which can be dissembled are used to connect bottom of guidance flow
panel and worktop for steel fume hood.
Between steel exterior structure and lining material, all-steel frame and fixed parts are applied.
The fixed parts thickness is at least 2mm. Steel side panel can be dissembled, There are two
pcs of maintainance side compact panel can be dissembled. The public device can be maintained
between the steel exterior structure and lining panel.
Movable door: The lifting and dropping are flexible which can stop at any position. Device is
installed to limit the top position. With 6mm anti-explosion glass with film inside.Sliding door
and hinge coaxial pulley wheel system is used to ensure the smooth and exact balance, this
system can prevent the tilting of movable door and the lifetime can reach above 100,000 times.
Light: Antisepsis day-light lamp fitted in gas insulated housing, not lower than 400lux.Socket: Four sets of 220 volt/ 10 AMP multi-functional electric socket outlets with water proof
|Size(mm)||Air Volume(m3/h)||Differential Pressure(Pa)||Noise dB|