YZG-2 Ampoule Glaze Printing Machine
Application:
This machine applies the high-precision orientation screen board print. Control system applies the programmed controller. Agglomeration subsection control temperature.
Usage:
The machine can auto print on the 1ml, 2ml, 5ml, 10ml and 20ml and non-state standard ampoule color print and print word. Clear characters, brilliant glaze, film firing and bright color satisfy the requirements for ampoule printing.
Characteristics:
1.The full production capacity applies the programmed controller, high automatization, stable and reliable. When there are no ampoules under the screen board, the knife can auto uplift, then prevent the use life of the screen board.
2. Apply the high-precision orientation silk screen board print. Silk screen board come and back once can complete two ampoules print. It owns high-efficiency and good coherence.
3. Agglomeration applies the electric heat and liquid gas heat. During the agglomeration, the temperature is subsection auto control. There isn't twice labor, so prevent the ampoule quality.
Main Technical Specifications:
| Model |
YZG-2 |
| Ampoule Specification (ml) |
1ml, 2ml, 5ml, 10ml, 20ml |
| Capacity (C) |
60000-80000/shift |
| Motor Power (kw) |
18-24 |
| Overall size (mm) |
6500*1200*1300 |
| Weight (kg) |
400 |
CBX Ultrasonic Ampoule Washing Machine
Application:
This machine suitable for washing ampoule, vials, oral liquid bottle and other glass bottles, conform to GMP standard.
Working principle:
Machine made by stainless steel 304. Front part is water injection roughly washing section; the rear part is ultrasonic fine washing section. (Roughly washing and fine washing integrated). The drive chain deliver the conveying disk to water injection section, the bottle go into first washing stage, and then go into fine ultrasonic washing. Water injection section is roughly washing, adopt the pressure pump and filter pump to increase the clean effect. Fine washing adopt the ultrasonic waving to clean the bottles.
Technical parameters:
Production capacity: 60,000-80,000ampoules/ batch
Chain drive: 0.3~0.6m/min
Pump power: 3kw
Ultrasonic waving: 0.5×2kw
Drive power: 1.5kw
Specification: 4800×1200×1350(mm)
Ampoule Water Throw-off Machine
Application:
This machine is an assistant device for help first drying the bottles after the bottle delivers out from the CBX ultrasonic washing machine. And when the empty ampoules go out from this throw-off water machine, it will go to the next station: totally drying and sterilizing.
Technical parameters:
| Production capacity |
30,000-100,000ampoules/hour |
Motor power |
1.5kw |
| Material |
S.S 304 |
Specification |
1000*900*1240mm |
CT-C Hot Air Circulating Drying Oven for Empty Ampoules
Single door, single cart, 12floors (2tray/floor, total 24 trays)
CT-C Series Hot Air Circulating Drying Oven adopts noise elimination and thermal stable axial flow fan and automatic temperature control system. The entire circulation system is enclosed to make that the heat efficiency of the drying oven increases from 3~7% of the traditional drying oven to 35~45% of the present one. The highest heat efficiency can be up to 50%.The successful design of CT -C hot air circulation oven makes that the hot air circulation drying oven in our country reach the advanced level in the world. It saves energy and increases the economic benefit.In1990, the medical management bureau of the State issued the industry standard and the uniform type is RXH.
1.The heat source can be steam, electricity, far infrared, or steam+electricity. Customer can select one of the heating ways in accordance with practical conditions;
2.The temperature of operation:50 ~ 140 ºC for steam, Maximum temperature will be 150ºC;
3.50 ~ 350ºC for electricity or far infrared;
4.There are automatic and computer control systems for customer selection;
5.The normal pressure of steam will be 0.02-0.8MPa (0.2-8kg/cm 2);
6.The equipped power of electric heater will be 15kw Calculated with Model I and the operational power to be used will be 5-8kw/hr;
7.For special requirement, please indicate it in order;
8.The price of non-standard oven shall be discussed additionally;
9.If the operation temperature is more than 140 ºC or less than 60ºC, please indicate it in order;
10.The size of drying trolley and tray is standardized. They can be exchanged each other;
11 The size of drying tray:460 ×640×45(mm).
ALG-4 Automatic Ampoule Filling and Sealing Machine
Application:
The machine is a new generation of the ampoule drawing, filling and sealing combined equipment for injections. It adopts the rectangular feeding instead of the traditional ampoule feeding methods. In such case, the feeding is steady with no easy broken ampoule. A modern clutch is mouthed under the ampoule feed hopper.
Therefore, the ampoule feeding can be stopped at any time while the machines are still running. So the ampoule lost can be reduced. In the part of stopping filling where changes electromagnetic switch into mechanical switch. It is reliable and durable; bottle reverse and bottle arranging structure are used in the device of bottle outlet. It reduces the broken rate of the finished product.
Technical Parameters:
| Model |
ALG4/1-2 |
ALG4/5-10 |
| specification |
1 - 2 ml |
5 - 10 ml |
| Production capacity |
7000-9000 bottles/hour |
6000-8000 bottles/hour |
| Precision of filling & sealing |
±1% |
| Broken rate of the ampoule |
≤ 1% |
| Sealing rate |
≥ 98% |
| Sealing gas |
1) Coal gas + oxygen
2) Liquid gas + oxygen |
| Pressure of gas |
1) Coal gas = 0.9 - 1 MPa
2) Oxygen = 0.08 - 0.1 MPa |
| Power |
0.67 KW |
| Power supply |
AC, 380V/50HZ 3 phase or customized |
| New weight |
350 kg |
| Overall size |
1650 x 900 x 1500 mm |
| Model |
ALG4/20 |
| specification |
20 ml |
| Production capacity |
4000-5000 bottles/hour |
| Precision of filling & sealing |
±1% |
| Broken rate of the ampoule |
≤ 1% |
| Sealing rate |
≥ 98% |
| Sealing gas |
2) Coal gas + oxygen
2) Liquid gas + oxygen |
| Pressure of gas |
3) Coal gas = 0.9 - 1 MPa
4) Oxygen = 0.08 - 0.1 MPa |
| Power |
0.67 KW |
| Power supply |
AC, 380V/50HZ 3 phase or customized |
| New weight |
350 kg |
| Overall size |
1650 x 900 x 1500 mm |
AM-0.36/AM-0.6 Ampoule Leak Sterilizer
Application:
This AM series is a kind of high-performance and high-intelligence equipment for sterilizing, leak detecting and cleaning, which adopts colorful touch screen and PLC, applicable to ampoules, oral medicine, small infusion, etc. After sterilization, by means of vacuum or color water detection, the detection rate of waster is assured to be 100%.Finally washing with pure water ensures the surface of ampoules clean.
Technical Parameters:
| Model |
Inner size(mm)
L×W×H |
Over size(mm)
L×W×H |
Loading |
| Transport tray |
1ml ampoules |
2ml ampoules |
Loading cart |
Transport cart |
| AM-0.36 |
1000×600×600 |
1195×1220×1720 |
9 units |
14994 |
11097 |
non |
non |
| Am-0.6 |
1050×680×850 |
1245×1300×1880 |
60 units |
63240 |
36912 |
1 |
2 |
Audited Supplier 
){kind=link}
){kind=link}