| Standard: | GB |
|---|---|
| Application: | Construction Machinery, Cement Plant, Mining Machine, Thermal Power Plant, Coal Yard |
| Material: | Aluminum |
| Type: | Wear Resistant Plate |
| Content: | 92% Alumina |
| Size: | 20*20, 17.5*17.5,10*10,25.4*25.4,12.5*12.5 |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Ceramic lagging is one of the most commonly used types of lagging applied to conveyor pulleys. It is often used in harsh conditions where abrasive material is conveyed because the ceramic is hardier and more durable than rubber lagging.
Ceramic lagging can be applied to the pulley shell as a rubber backed ceramic sheet or strip. In this case, the rubber backing is bonded to the pulley shell. Alternatively, the ceramic tiles can also be bonded directly to the shell without a rubber sheet or strip.
Common Types of Ceramic Lagging
The most common types of ceramic lagging are dimple and smooth finished ceramic. Both of these types of ceramic lagging offer a significant increase in friction and grip to the belt and can reduce belt slippage.
Dimple vs Smooth Ceramic Lagging
Drive pulleys are usually lagged with dimple ceramic lagging because dimpled ceramic has increased friction and grip to assist in driving the conveyor belt. Non-drive pulleys can be lagged with smooth ceramic; however, this is less common.
Smooth ceramic lagging is generally used on non-drive pulleys as the need for friction is significantly reduced and unwanted friction can cause additional belt wear. The use of dimple ceramic lagging on non-drive pulleys has a high chance of causing scratching and wear to the belt when unwanted friction and slippage occurs.
| Character | 92 | 95 | T95 | ZTA |
| Density(g/cm³) | ≥3.6 | ≥3.65 | ≥3.7 | ≥4.15 |
| Al2O3(%) | ≥92% | ≥95% | ≥95% | ≥75% |
| ZrO2 +Y2O3 | / | / | / | ≥21% |
| Bending Strength(MPa) | ≥220 | ≥250 | ≥300 | ≥400 |
| Compressive Strength (MPa) | ≥1050 | ≥1300 | ≥1600 | ≥2000 |
| Fracture Toughness(MPa.m1/2) | ≥3.2 | ≥3.2 | ≥3.5 | ≥5.0 |
| Rockwell Hardness HRA | ≥82 | ≥85 | ≥88 | ≥90 |
| Vickers Hardness HV20(MPa) | ≥950 | ≥1000 | ≥1100 | ≥1400 |
| Wear Volume(cm³) | ≤0.25 | ≤0.20 | ≤0.15 | ≤0.05 |
1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.
The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.
1. Are you are trading company or a factory?
We are a leading factory, manufacturing high alumina ceramic wear resistant liners in Zibo, China
2. What is your monthly capacity?
800 ton per month
3. What kinds of ceramic wear resistant liners do you manufacture?
92%alumina liner, 95%alumina liner, T95%alumina liner, zirconia tile liner, ZTA tiles , ceramic-rubber composite plates, wearing compound
4. What is the delivery time?
If we have stock, the delivery time is within 3days after order confirmed. If there is no stock, it is usually 13days.
5. Can you manufacture ceramic liner according to customers' desgin?
Yes, we have 5 engineers and we can produce ceramic parts according to the drawings of the customers.
6. What is the packing?
carton, and then wooden pallet or wooden box, 20~25tons per 1*20"FCL
7. What is the nearest port?
Qingdao port
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}