KT-300S Detailed Introduction
1. Alarm led (red)
2. Process Value
3. Set Point, output %, or heater current
4. Heat on led (red)
5 Press and hold this key to access parameter setting.
6. Press this key to display output %, or heater current
8. Use this key to change the control mode,
9. Power on/off switch
10. Fixed screw
11. Auto mode led (red)
12.Manual mode led (red)
13. Standby mode led (red)
14. Press this keys to increase a value
15. Press this keys to decrease a value
- Own enginner,could always update old products and add new products.
- Connector: All series use Germany Harting connector
- Switch:South korea LG brand
- CPU and important integrated circuits all use USA ST brand,make the control more accurate and run more smoothly.
- Power cable and hot runner cable:Using professional and customized products, the supplier is Far East Group, the first largest cable manufacturer in China, and the quality is guaranteed the most.
- All series have CE certificate
Hot runner controller Standard:
Be Equipped with 4 meters hot runner control cable and power cable
Connector ,connection mode can be produced according to your requirement
Click the link:https://www.youtube.com/watch?v=fiXaEfjS9Hc
5) Main Specifications:
-Power input voltage:AC 185-245V,50/60HZ,15A
-Thermocouple wire type:J or K
-Temperature control range:50ºC~550ºC
-Temperature control type:FUZZY +PIDD artifical intelligence+ shift-phase control
-Protection function against short circuit/open circuit,alarm in case of thermocouple misconnection
-Automatic environment temperature compensation.
-Soft-start automatic setting temperature range.
-380V input protection avoids the damage to controller arising from wrong voltage input.
-Thermocouple protection function enables the controller to identify heating wire and thermocouple automatically to avoid the damage to thermocouple arising from wrong input of inductor.
-Automatic environment linear compensation ensure higher precision of temperature value.
-Output interruption check.
-Loop break detection
-Manual power output mode
--Display errors completely to help you find failure reasons easily.
KT-300S hot runner temperature controller are equipped with all international functions and suited with DME,Yudo and Husky brands.
8)Connection Mode and Power supply diagram
|Thermocouple breakage||tC oPEn |
display tC alternately with oPEn
|Test the thermocouple with ohmmeter|
|Thermocouple "pinched"||tC SHrt|
display tC alternately with SHrt
|Find where the thermocouple is pinched|
|Thermocpuple inverted||tC rEu|
display tC alternately with rEu
|Check the thermocouple|
|Thermocouple and heater swapped||tC bAd|
display tC alternately with bAd
|Check the thermocoule and heater|
|Scr breakage||Scr bAd|
display scr alternately with bAd
|Test the Scr with ohmmeter|
|The voltage is error||HIGH voL|
display HIGH alternately with voL
|Check the the input voltage in cabinet|
|Heater breakage||HEAt oPEn|
display HEAt alternately with oPEn
|Test the heater with ohmmeter|
|Heater "pinched"||out SHrt|
display out alternately with SHrt
|Find where the heater is pinched|
|Fuse breakage||F1-2 brk|
display F1or2 alternately with brk
|Replace the fuse F1 or F2|
All series of controller can be customized!!!