• Cw 5.8g RF PA for Drone 50W Customized
  • Cw 5.8g RF PA for Drone 50W Customized
  • Cw 5.8g RF PA for Drone 50W Customized
  • Cw 5.8g RF PA for Drone 50W Customized

Cw 5.8g RF PA for Drone 50W Customized

Frequency Range: 4G
Frequency: 5g
Application: 3G
Transport Package: Wood Box
Specification: 1.5Kg Aluminium alloy
Trademark: Yonlit
Samples:
US$ 1600/Set 1 Set(Min.Order)
| Request Sample
Customization:
Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
HPA-GN47(5.4-5.5GHz)
Origin
Shenzhen, China
HS Code
8543709990
Production Capacity
200

Product Description

Main Feature

*With built-in Signal scource
*With built-in MCU 
* Adjust Pout from 40-47dBm
*Monitoring: VSWR, output power


HPA  GSM/DCS/3G/LTE/WiFi/GPS 50W

No. Item Requirements
1  Frequency Range 5400-5500MHz    
2 Max Pout 47dBm±0.5dB
3 Pin range 5-10dBm
4 Gain >45dB±1.5dB
5  Gain Adjust 31dB,1dB Step
6 IN/OUT VSWR 1.5
7 IN/OUT Impedance 50 Ohm
8 Working Voltage 28VDC±1V
9 Working Current <5.5A
10 RF IN/OUT Ports SMA - Female
11 Dimension 180*90*25mm (Exclusive Connector)
12 Power Supply Port Pull-core Capacitor
13 Working Temperature -25----+65ºC
14 Protection Shutdown more than 75ºC, auto-restart less than 50ºC
Shutdown when reversed power more than 15W, auto-restart after 30s
15  I/O Port DB15 Female
(Standard)
PIN1: 1dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT)
PIN2: 2dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT)
PIN3: 4dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT)
PIN4: 8dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT)
PIN5:16dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT)
PIN7: Pr(Reversed RF Power, Max:1.5-2V,0.05V/dB,10dB range)
PIN10: Pf(Forward RF Power, Max:1.5-2V, 0.05V/dB, 20dB rang)
PIN11: EN (5V: PA OFF; Hang in air or grounding: PA ON)
PIN14: TV(Temperature Indicator :0.01V/1ºC)
PIN15: GND
PIN6, PIN8, PIN9, PIN12, PIN13: NC

Feature:
  1. The general Power Amplifier can be used for Jammer, BDA, Repeater, BTS, or Lab equipment.
  2. Pout is stable over -20~65ºC
  3. Efficiency is more than 30% for 50W
  4. Over-high VSWR to avoid or reduce the damage from any mismatch
  5. Over-high temperature protection, Shutdown more than 75ºC, auto-restart less than 50ºC
  6. DB15 serial port is standard, DB9 Parallel RS485 is optional(China Mobile Protocol)

Remarks
  1. PA should operate on an appropriate radiator, or it would shutdown over high-temperature.
  2. Pout port can't open or short, otherwise PA maybe get burned and damaged.
  3. Pout port should be connected to a probably Load, Attenuator or antenna (50 ohms, more than 100W handling Power, lower than VSWR 2.0).
  4. The power range and polarity of power supply must correct, otherwise will damage the PA.
  5. Pout probably is lower the rated power if input Power is lower than 5dBm; PA probably is damaged if input power is higher than15dBm


Power Supply:  28V,6A
Monitoring :  Output Power, Alarm VSWR,  Alarm Temperature 
Operating Temperature : -25 to +55ºC ,  Humidity: <95%
Aluminum alloy case:  18*90*25(cm)55Kg
1 year from ship to you

Contact info:
Cw 5.8g RF PA for Drone 50W Customized



 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory
Registered Capital
500000 RMB
Plant Area
501~1000 square meters