TX-5080ST High Precision Flat Vertical Screen Printing Machine
Scope of Application
It is suitable for flat printing of glass, CD, nameplate, stickers, credit cards, ceramic flower paper, wooden toy
puzzles and electronics industry PCB, SMT solder paste, membrane switch and other products. It is also
suitable for flat printing of products with high precision of overprinting, such as gold and silver cardboard, metal
sheet, PVC, etc.
Main Parameters
Model | TX-5080ST | | Printing thickness | ≤30mm |
Max printing area | 500*800CM | Air pressure | 4.0~6.0 kfg/cm2 |
Size of printing table | 600*900CM | Rated voltage/Power | 380V/50HZ /3.2KW |
Max size of screen frame | 800*1200CM | Size of package carton | 1460*1150*1650CM |
Max printing speed | 1000(PCS/H) | Gross weight | 522(KG) |
Main Performance1.vertical structure with the electronic driven printing plate goes up and down vertically, and the electronic driven
print head moves left/right.
2. Single chip controlled circuit, printing and plate goes up and down using independent driving source.
3. Pneumatic controller controls the printing knife moves up and down, photocell eye controls the stroke, which is
independent to tune.
4. Set manual/semi-automatic /automatic three modes , the break time of printing is digital controlled.
5. Independent designed head rising and down setting, makes it convenient to clean the scraping blade/reclaiming
blade,screen plate during loading and unloading.
6. Double guide column master the clamps arm, and install the adjusting device to adjust the distance between
plates at the same time, which is convenient to tune.
Configuration Instructions
1. The machine controlled by MCU.
2. Circuits adopt AC contactor chint, RIKO Photoelectric eye switch produced in Taiwan.
3. Adopt Cheng Bang Gear Motor from Taiwan, driven by Variable printing.
4. Printing scraper and reclaiming blade controlled by AirTAC brand pneumatic component.
5. Left/right scratchers adopt HIWIN precision liner guide from Taiwan.
6. Printing plate adopts pneumatic stainless steel and suction system which is produced by Shanghai
State-owned factory.
Hot melt Powder Coating Machine
Scope of Application
Full-automatic Power Coating Machine is a post printing machine which can be used to replace the traditional
glitter powder/hot-melt powder technology. It has the features such as easy to operate, no dust pollution, etc.
When it is used Full-automatic Press Grain Machine is a post printing machine which can be used to replace
the traditional to equip the screen printing machine, the work efficiency can be increased greatly, the utilization
ratio of glitter powder will rise and a great variety of glitter powder pictures can produce.
If required, this machine can easily connect with drying machines, UV glazing machines, etc. It adopts the upper
and lower suction port design to prevent the occurrence of scratches on the surface of the film, and is the best
ost-press equipment for the film glitter process.
Main Parameters
Model | TX-SF80D |
Suction type | Double suction |
Max dusting width | 800mm |
Thickness of paper max size of screen frame | 5mm |
Max working speed printing speed | 1500m/h |
Power | 3.0KW 380V 50HZ |
Main Performance
1.The key parts of the machine such as conveyor belt, frequency converter are imported parts, which are easy
to use and flexible adjustment.
2.The unique powder spraying system enables the color powder to be evenly attached to the printed matter.
3.With the color powder recovery system, the excess color powder is lightly pressed by the drum before being
dried to make it evenly balanced.
4.Podwer - lightly pressure - recycling - drying, high efficiency and energy saving completely solve the problem
of uneven podwering, low efficiency, color powder flying all over the sky.
5.All transmission parts of the whole machine are stepless adjustment, with high durability, good stability and
other characteristics.
IR Drying Tunnel
Scope of Application
It is suitable for rapid drying of solvent - based inks and drying of general moisture - containing items. Such as:
paper printed matter, chemical products, glass, sheet, PVC, metal nameplate, etc.
Product Details
Main Parameters
Model | TX-IR1800 | Loading section | 1000mm(to be determined) |
Output section | 1000mm(to be determined) | IR heating section | 2000mm * 4groups |
Cooling Section | 2000mm * 1groups | | |
Production material
1.Heat curing oven:Curing oven:80mm insulation board
2.Shaft arm and base:1.4mm cold rolled plate
3.Inner plate:1.2mm stainless steel plate
Heating source:
220V 1000W 9 infrared heating tubes or carbon tubes
Single heating length: 900mm
Total heating power: 9KW
The heating system is divided into one control, one temperature control and one temperature display in each
group.
Heating temperature requirement: Room temperature-180 degrees (adjustable)
Relative temperature difference:±2 degrees (to ensure uniform heating temperature)
Temperature control accuracy:±1 degree
Hot air circulation:380V 370W Insulated centrifugal fan 1 Set
Conveyor system:
380V 1100W Frequency control motor - Teflon mesh belt transmission(Taiwan/CPG)
380V 1500W Frequency converter (Taiwan/HOLIP)
Speed range:1-5m/min
Conveyor belt: High temperature resistant Teflon mesh belt, mesh belt width:1000mm mesh:4*4mm
IR Heating system:
1.2 sets of control units to control on/off.
2.2 sets of thermostats to control and display temperature.
Packaging and Delivery
Contact Us