300/500V 2c+E Earth Flat TPS Cable

Basic Info.
 

Model NO.:2 core & earth flat TPS cable

Type:Insulated

Application:Heating, Underground

Certification:ISO9001, CCC

Conductor Material:Copper

Conductor Type:Stranded

Insulation Material:PVC

2X2.5+E:Max. DC Resistance at 20 Degree 7.41 Ohm/Km

2X1.5+E:Max. DC Resistance at 20 Degree 12.1 Ohm/Km

2X4+E:Approx. Overall Diameter 14.0X6.5mm

Export Markets:Global

 

Additional Info.
 

Trademark: KAIQI POWER

Packing:100m Per Coil

Standard:As per Standards AS/NZS 5000.1

Origin:Zhengzhou, China

HS Code:8544492100

Production Capacity:10X20′gp Per Month

 

Product Description
 

2 core & earth flat TPS cable Low voltage LV 450/750V 2 core and earth Flat TPS cable 

These products are offered to AS/NZS 5000.2 (450/750V) or the more robust construction of AS/NZS
5000.1 rated at 600/1000V. 

This particular range of cables is popularly known as TPS or tough plastic sheathed cables and can
be split into two categories. 

Flat TPS trades some of the toughness for an easi peel sheath and is commonly used for the fixed wiring
of domestic and industrial lighting, power outlets, and heating. 

Circular TPS retains the tough plastic sheath and is more commonly used for commercial and industrial
wiring to motors, heating, and lighting, and areas where glanding is required. 

CONDUCTOR 
Conductors consist of plain annealed copper. 

INSULATION 
Cables should never be bent to a small radius. The prescribed minimums on the following datasheets should
be considered the exception rather than the rule and the actual bending radius the largest which circumstances
will permit. A cable must also not be laid or otherwise bent when it is at such a low temperature that damage
might be caused to the insulation or serving. Where environmental conditions are at or below 0° C, cable
drums will require heating, or drums stored on a site with a higher ambient temperature, and moved and
installed as quickly as possible before significant cooling can take place. Cables can be pulled into position
by hand, cable stocking or conductor hauling eye but for high pulling tensions a hauling eye is preferred to
avoid stretching of the outer layer. 

APPLICATION
Easi-peel sheath for general wiring, unenclosed, enclosed in conduit, in underground ducts for domestic,
commercial and industrial installations where not subject to mechanical damage. Suitable for single phase
applications requiring neutral and earth. 


STANDARD: AS/NZS 5000.1 
VOLTAGE: 450/750V 
CONDUCTOR: Copper 
INSULATION: PVC, V-90 Red, Black & Yellow/Green 
SHEATH: PVC, 3V-90 
NORMAL OPERATING: TEMP. 75 degree C. 


TECHNICAL SPECIFICATION AS BELOW

Luxing Cable Factory Mainly Produce 

Certificates 


Type Test Report 


Packaging & Shipping 



FAQ

1.Are you a factory or a trading company?

   We are a factory.

2.Can you provide free samples?

   Yes, we can provide free samples of our products, just contact us with the details of samples needed. 

3.What's the MOQ requirements of your products?

   Our MOQ requirement depends on actual size and cable type