1.Introduction about us: We are Cangzhou Lockheed Drilling Equipment Parts Co., Ltd. specializes in drill bits, drill pipe, for water well, oil field, construction, geothermal, directional boring, Including three series with full model types,as follows: Drilling Bit series: rock roller bit,tricone bit,pdc drill bit,single bit,cone bit and hole opener; Drilling Equipment Parts series: manual tong,elevator,slips,stabilizer; Workover Fishing Tool series: releasing spear,junk basket, overshot,reversing sub,die collar, fishing tap etc. Cangzhou Lockheed Drilling Equipment Parts Co., is located at the center of Beijing-Tianjin-Hebei-Shandong-Henan-Region which is adjacent to National Expressway No.106, 166km away from Beijing, 110km away from Tianjin and 35km away from Baiyangdian, the Pearl of Huabei Area. More convenient transport,faster delivery,and more trustful enterprise is your best choice. Come on,join us.
2.Specifications about our tricone bit TCI bits 1,Soft formations(417,437,517,537) Features large chisel-shaped inserts to provide the highest penetration rate in the softest formations such as shales, clays, limestone and sands. 2,Soft to medium formations(617,637) Designed to drill effectively in formations such as hard limestone, dolomite, hard sands, and other formations with hard cherty. 3,Medium to hard formations(737) For extremely hard formations such as chert, granite, flint, and taconite. Features short, closely-spaced inserts to ensure maximum penetration rate and wear resistance Milled tooth bits 1,Soft formations(114-117) These bits are designed to drill the softest formations such as soft shales,red beds, and clays, with high durability and maximum penetration rates. 2,Soft to medium formations(121,124,126,134,136,137) These bits are designed to drill formations such as shales, medium soft limestone, Medium sandstone and other formations with intermittent hard streaks. 3,Medium to hard formations(213,214,215,217) These bits are designed to drill formations such as hard sandstone, dolomite, and broken formations with hard cherty streaks Main features 1. Cutting Structure of this type sealed and non-sealed tci tricone bits : The wear-resistance of teeth is enhanced with premium tungsten carbide hard facing on the tooth surfaces for steel tooth bit. 2. Gauge Structure of this type tci tricone rock bits: Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hard facing on the shirttail increases gauge holding capability and bearing life. 3. Bearing Structure of this type tci tricone rock bits : High precision roller bearing with two thrust faces. Ball locks the cone. Thrust faces hard face with wear resistant alloy. Abrasion resistance and seizure resistance of the bearing are improved. Metal Sealed Bearing Tricone Bit ----Cutting Structure Steel Tooth: Premium tungsten carbide hard facing on the surface, it's greatly enhance the wear resistance of the tooth.Tungsten Carbide Inserts: Various type high quality tungsten carbide inserts can be equipped on the bits, professional and scientific selection of the inserts as per the different application and drilling process so that to achieve high efficient drilling production. ----Gauge Structure Multiple gauge protection with gauge trimmers on heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life. ----Bearing Structure Journal bearing and roller bearing types are available to be chosen. Abrasion & seizure resistance, loading capacity, stability of the bearing are well improved, suitable for high speed rotary drilling. ----Seals and Lubrication The advanced metal seals improve the reliability and stability of the bearing sealing. Pressure difference type compensating system assures a good greasing lubrication function. ---- IADC vary from 117--637 applicable for different type form.
How to order the products??? Please send the inquiry with detail item description or with Model number. If there is no packing demand we take it as sea-way packing. If possible please attach one reference picture to avoid any misunderstanding or any links from our website for we get a better understanding. Can I expect a quality products??? Yes. of course.All our activities are accredited to ISO 9001:2008 and API, both in products and services, at the same time, mature production technology ensuring the quality satisfy international request. PLs add the information in your inquiry. 1) the size of the tricone bit 2) the IADC tooth model, like 537G 3) PLs tell the drilling information of the layer. 4) PLs tell the quantity. All Sizes and IADC Codes of Drill Bits Are Available. Special Requirements of Different Models Can Be Customized.